(a) They do not cross each other.
(b) The work done in carrying a charge from one point to another on an equipotential surface is zero.
(c) For a uniform electric field, they are concentric spheres.
(d) They can be imaginary spheres.
1. By definition, for an equipotential surface, the potential is constant everywhere, so .
2. Two equipotential surfaces can never intersect; otherwise, there would be two different potentials at the point of intersection.
3. For a point charge, equipotential surfaces are concentric spheres.
4. However, for a uniform electric field directed along a specific axis, equipotential surfaces are equidistant planes perpendicular to the field lines, NOT concentric spheres.
Therefore, statement (c) is false and is the correct answer.
Point charges produce concentric spherical equipotentials; line charges produce coaxial cylinders; uniform electric fields produce parallel planar equipotentials.
(a)
(b)
(c)
(d)
1. Formula for torque on an electric dipole:
2. Rearranging for charge :
3. Given values:
-
- Dipole length
-
-
4. Compute :
Therefore, the correct option is (c).
The dipole length is $2a = 2\text{ cm}$, not $a = 2\text{ cm}$. Convert centimeters to meters ($2 \times 10^{-2}\text{ m}$) before calculation.
(a) Blue
(b) Yellow
(c) Red
(d) Violet
1. By Einstein's photoelectric equation:
2. Stopping potential is directly proportional to the frequency (and inversely proportional to wavelength ) of incident light.
3. In the visible spectrum (VIBGYOR), violet light has the shortest wavelength and the highest frequency (highest photon energy ).
4. Consequently, photoelectrons emitted by violet light possess the maximum maximum kinetic energy (), requiring the greatest stopping potential .
Higher frequency $\implies$ higher photon energy $\implies$ greater maximum kinetic energy of emitted photoelectrons $\implies$ higher stopping potential.
(a) alpha particles are positively charged
(b) the mass of an alpha particle is more than the mass of an electron
(c) most of the part of an atom is empty space
(d) all alpha particles move with the same velocity
In Rutherford's alpha-particle scattering experiment, nearly of incident -particles passed straight through the gold foil without suffering any deflection. This led Rutherford to conclude that most of the space inside an atom is empty, with the positive charge and almost the entire mass concentrated in a tiny central nucleus.
Direct consequence of Rutherford's nuclear model of the atom.
(a) along positive -axis
(b) along negative -axis
(c) along positive -axis
(d) along negative -axis
1. Magnetic Lorentz force on a moving charge is:
2. Here, velocity , magnetic field , and charge of electron .
3. Compute cross product :
4. Multiplying by negative electronic charge :
5. Hence, the force acts along the negative -axis (Option b).
Do not forget that the charge of an electron is negative ($-e$), which reverses the right-hand thumb rule direction.
(a) is paramagnetic and is ferromagnetic
(b) is diamagnetic and is ferromagnetic
(c) is ferromagnetic and is paramagnetic
(d) is diamagnetic and is paramagnetic
1. Diamagnetic materials: Susceptibility is small and negative (), so relative permeability is slightly less than unity (). Thus, is diamagnetic.
2. Paramagnetic materials: Susceptibility is small and positive, so relative permeability is slightly greater than unity (). Thus, is paramagnetic.
3. (Ferromagnetic materials have , on the order of hundreds or thousands).
Diamagnetic: $0 \le \mu_r < 1$; Paramagnetic: $\mu_r > 1$ (slightly); Ferromagnetic: $\mu_r \gg 1$.
(a)
(b)
(c)
(d)
1. Let be the full-scale deflection current of the galvanometer/ammeter, and be its resistance.
2. Required maximum current range .
3. Shunt resistance formula:
4. Substitute values:
Therefore, Option (b) is correct.
The current dividing through shunt is $I_s = I - I_g$. Voltage across shunt equals voltage across meter: $S(I - I_g) = I_g G$.
(a)
(b)
(c)
(d)
1. A revolving electron constitutes an orbital current .
2. Orbital magnetic moment is .
3. Orbital angular momentum is .
4. Substituting into magnetic moment:
(In vector form: , where gyromagnetic ratio is ).
The gyromagnetic ratio $\frac{\mu_l}{L} = \frac{e}{2m_e}$ is a fundamental constant for an orbital electron.
(a) current is increased and power loss () is increased
(b) current is decreased and power loss () is increased
(c) current is increased and power loss () is reduced
(d) current is reduced and power loss () is reduced
1. Transmitted electric power is . For a given power level, stepping up voltage by a factor reduces current by the same factor .
2. Joule heating / transmission loss in power cables is .
3. Reducing the current dramatically decreases heat losses by a factor of , making high-voltage transmission economically viable and energy-efficient.
Loss is proportional to $I^2$. Reducing $I$ by stepping up $V$ is the cornerstone of AC power distribution grid design.
(a) -axis
(b) -axis
(c) -axis
(d) -axis
1. In an electromagnetic wave, the direction of propagation is given by the Poynting vector:
2. Propagation is along -axis ().
3. Electric field is along -axis ().
4. We require .
5. Since , must point along the -axis (Option a).
The triad $(\vec{E}, \vec{B}, \vec{k})$ forms a right-handed orthogonal system: $\vec{E} \times \vec{B} \parallel \vec{c}$.
(a)
(b)
(c)
(d)
1. Induced charge flowing through the coil is related to change in magnetic flux by:
2. The total charge is the area under the current-time () graph:
3. Change in magnetic flux:
Therefore, Option (d) is correct.
Remember the fundamental relationship: $\Delta\Phi = R \int I \, dt = R \cdot q$. Charge is the area under the $I-t$ curve.
(a) electron is free to move
(b) electron is bound to the nucleus
(c) electron has lost all kinetic energy
(d) electron cannot emit photons
The negative total energy indicates that the electron exists in an attractive potential well created by the positively charged nucleus. Energy must be supplied from outside to overcome this electrostatic attraction and liberate the electron to infinity (). Hence, the negative sign signifies a bound state.
Total energy $E < 0$ means bound system; $E \ge 0$ means unbound, free particle.
Assertion (A): For radiation of frequency greater than the threshold frequency, the photoelectric current is proportional to the intensity of incident radiation.
Reason (R): Greater intensity means a greater number of photons incident per second, each knocking out one photoelectron.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
1. In the photon picture of light, intensity at a fixed frequency is directly proportional to the number of photons incident on the metal surface per unit area per unit time.
2. In a one-to-one photon-electron collision process, more incident photons liberate more photoelectrons per second, directly increasing the saturation photoelectric current ().
3. Both statements are true, and Reason (R) is the exact theoretical explanation of Assertion (A).
Intensity affects the NUMBER of emitted photoelectrons (current), whereas frequency affects the KINETIC ENERGY (stopping potential).
Assertion (A): Putting a p-type semiconductor slab directly in physical contact with an n-type semiconductor slab cannot form a p-n junction.
Reason (R): Any physical contact results in microscopic roughness and discontinuity at the atomic scale compared to interatomic spacing (), preventing charge carrier diffusion.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
1. A p-n junction requires continuous crystalline lattice continuity across the junction interface with interatomic spacing on the order of .
2. Simply pressing two macroscopic semiconductor slabs together leaves surface oxides, air pockets, and microscopic roughness (), which acts as an insulating barrier that prevents carrier diffusion.
3. Therefore, p-n junctions must be grown epitaxially or fabricated by diffusion/doping into a single crystal.
NCERT explicit point: You cannot make a p-n junction by simply pressing a p-type and n-type slab together because surface roughness exceeds atomic spacing.
Assertion (A): An electron has higher potential energy when it is at a location associated with a negative value of potential, and lower potential energy at a positive potential.
Reason (R): Electric potential is defined as work done per unit positive charge.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
1. Electric potential energy of charge is . For an electron with negative charge :
- At negative potential : (higher potential energy).
- At positive potential : (lower potential energy).
Hence, Assertion (A) is true.
2. Reason (R) correctly states the definition of electric potential (). Reason is a true statement.
3. However, (R) does not explicitly mention the negative charge of the electron which reverses the sign of . Therefore, (R) is not the complete explanation.
For negative charges, potential energy is inverted: negative charges naturally accelerate from lower potential to higher potential.
Assertion (A): Propagation of light through an optical fibre is due to total internal reflection occurring at the core-cladding interface.
Reason (R): Refractive index of the material of the core of the optical fibre is less than that of the cladding.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
1. Assertion (A) is true: Optical fibres guide light via successive total internal reflections along the core.
2. Reason (R) is false: Total internal reflection can only take place when light travels from an optically denser medium into an optically rarer medium. Therefore, the refractive index of the core must be greater than that of the cladding ().
3. Since Reason states the core index is less, (R) is false.
Condition for TIR: Light must travel from denser to rarer medium ($n_1 > n_2$) at an incident angle greater than the critical angle ($i > i_c$).
(b) Draw a neat labeled circuit diagram of a full-wave rectifier using two p-n junction diodes and a center-tapped transformer.
(a) Device Name [1 Mark]:
- Rectifier (specifically, semiconductor diode rectifier).(b) Circuit Diagram of Full-Wave Rectifier [1 Mark]:
- Components: Center-tapped secondary of transformer, two junction diodes ( and ), and load resistor .
- Working connection:
- Upper terminal of secondary coil connected to anode of .
- Lower terminal connected to anode of .
- Cathodes of and tied together and connected to one terminal of .
- Center-tap of transformer connected to the other terminal of .
- In positive half-cycle, conducts; in negative half-cycle, conducts, producing unidirectional output across .
Clearly mark diode polarities (p-side and n-side) and label the center tap of the transformer.
(a) Identify the electromagnetic spectrum region to which this wave belongs.
(b) Calculate the amplitude of the oscillating magnetic field.
(a) Electromagnetic Region [1 Mark]:
- Given wavelength .
- This wavelength lies in the range , which corresponds to Microwaves.(b) Magnetic Field Amplitude [1 Mark]:
- The relation between electric and magnetic field amplitudes in free space is:
- Substitute and :
- Amplitude of the oscillating magnetic field is (or ).
Do not forget the unit of magnetic field (Tesla, T).
1. Plot of vs [1 Mark]:
- Curve rises sharply for light nuclei (), showing peaks for .
- Reaches a broad maximum of around ().
- Drops gradually for heavier nuclei, falling to for .
2. Conclusions regarding Nuclear Forces [1 Mark (0.5M each)]:
- Saturation of Nuclear Forces: The constancy of over a broad mass range () shows that nuclear force is short-ranged and acts only between immediate nearest-neighbor nucleons.
- Strongly Attractive Nature: The high binding energy value () proves that the nuclear force is overwhelmingly strong and attractive, easily overcoming Coulomb repulsion between protons.
Peak is at $^{56}\text{Fe}$ (8.75 MeV/nucleon); light nuclei undergo fusion, heavy nuclei undergo fission to reach higher $\text{BE}/A$.
1. Initial resistance at room temperature :
2. Steady-state resistance at temperature :
3. Using temperature dependence formula , change in temperature is:
4. Substitute values:
5. Steady temperature :
Hence, the steady temperature is (or ).
Do not forget to add room temperature $T_0 = 27^\circ\text{C}$ to $\Delta T$ to find the absolute final temperature.
Given:
- Mass of nucleus
- Mass of a proton
- Mass of a neutron
1. A nucleus contains protons and neutrons.
2. Mass Defect ():
3. Binding Energy per nucleus:
4. Number of nuclei in of copper:
5. Total Nuclear Energy Required:
Break-up energy is equal to total binding energy. Multiply energy per atom by the number of atoms in the given sample mass.
1. Let be the equivalent resistance of the infinite ladder across input terminals. Because the ladder is infinite, removing the first repeating stage leaves the identical infinite ladder with equivalent resistance .
2. The circuit simplifies to: a series resistor of in series with the parallel combination of shunt resistor and :
3. Given :
4. Simplify:
(Or for alternative infinite network variants with series resistor and shunt yielding quadratic ).
5. Therefore, the value of the resistance is .
In an infinite ladder, truncating one stage does not change the total equivalent resistance.
(a) outside the wire ()
(b) inside the wire ()
Draw a plot showing the variation of with distance from the centre of the cylinder.
Ampere's Circuital Law: .(a) Outside the cylinder () [1 Mark]:
- Consider an Amperian circular loop of radius concentric with the conductor.
- .
- Total current enclosed is .
- Consider an Amperian circular loop of radius .
- Current density .
- Current enclosed by the loop of radius :
- Applying Ampere's Law:
- Straight line through origin for ().
- Peak value at the surface .
- Hyperbolic decay curve for ().
Inside a solid conductor, magnetic field is proportional to $r$ ($B \propto r$); outside it drops as $1/r$.
1. Principle [1 Mark]:
- An AC generator works on the principle of electromagnetic induction.
- When a closed coil is rotated in a uniform magnetic field about an axis perpendicular to the field, the magnetic flux linked with the coil changes continuously, inducing an alternating emf across its terminals.
2. Derivation [2 Marks]:
- Let the coil have turns, cross-sectional area , and rotate with angular speed .
- At time , angle between magnetic field and area vector is .
- Magnetic flux linked with the coil at time is:
- By Faraday's Law of Induction, the induced emf is:
- Letting peak emf , the instantaneous induced emf is:
Peak emf is $e_0 = N B A \omega$. State clearly that $e$ oscillates sinusoidally.
(b) What will happen if the same lens is immersed in a liquid of refractive index ?
(a) New Focal Length in Liquid () [2 Marks]:
1. By Lens Maker's Formula in air:
2. In liquid of refractive index :
Hence, the focal length increases by a factor of .(b) Behaviour in Liquid with [1 Mark]:
- Here (), so .
- The sign of the focal length reverses, meaning the biconvex (converging) lens behaves as a diverging (concave) lens.
When immersed in a medium denser than glass ($n_m > n_g$), the lens changes its character (convex becomes diverging, concave becomes converging).
1. Ray Diagram [1.5 Marks]:
- Objective lens of large aperture and long focal length collects parallel rays from a distant star and forms an inverted real image at its second focal point .
- Eyepiece lens of smaller aperture and short focal length is adjusted so that lies exactly at its first focal point .
- Rays emerging from the eyepiece form parallel beams, resulting in the final image at infinity ().
2. Magnifying Power [1 Mark]:
- In normal adjustment:
(Negative sign indicates an inverted final image).
3. Length of Telescope Tube [0.5 Mark]:
- Separation between objective and eyepiece:
Normal adjustment means final image at infinity; tube length is $f_o + f_e$.
1. Wavefront Geometry [1 Mark]:
- Let be a plane wavefront incident at angle on the interface separating medium 1 (speed ) and medium 2 (speed ).
- Let be the time taken by the wave to travel from point to on the interface: .
- During this time , secondary wavelets from point propagate into medium 2 covering distance .
- The tangent plane drawn from to the wavelet sphere centered at constitutes the refracted plane wavefront inclined at angle .
2. Geometrical Derivation [1.5 Marks]:
- In right-angled :
- In right-angled :
3. Ratio & Snell's Law [0.5 Mark]:
- Dividing the two equations:
- Since refractive index , :
This proves Snell's law of refraction.
Show right-angled triangles $\triangle ABC$ and $\triangle ADC$ sharing common hypotenuse $AC$.
(a)
(b)
(c)
1. Phase difference is related to path difference by:
2. The resultant intensity of two coherent waves of equal intensity is:
3. When path difference is , :
Thus, .(a) Path difference [1 Mark]:
- .
- .(b) Path difference [1 Mark]:
- .
- .(c) Path difference [1 Mark]:
- .
- .
General formula for intensity in YDSE: $I = I_{\max} \cos^2(\phi/2) = K \cos^2(\pi \Delta x / \lambda)$.
Answer the following questions:
(i) What happens to the capacitance of the capacitor? [1 Mark]
(ii) What happens to the charge on the capacitor plates? Justify. [1 Mark]
(iii) Calculate the new potential difference between the plates and the new electrostatic energy stored in the capacitor. [2 Marks]
(i) Capacitance [1 Mark]:
- When a dielectric of constant completely fills the gap, the capacitance increases by a factor of :
- The battery was disconnected before the dielectric slab was inserted.
- Because the plates form an isolated system with no external conduction path for electrons to leave or enter, the charge remains conserved:
- Potential Difference:
The potential difference decreases by a factor of . [1 Mark]
- Stored Energy:
The electrostatic energy decreases by a factor of . The decrease in stored energy () is transformed into mechanical work done by the electrostatic field in pulling the dielectric slab into the capacitor plates. [1 Mark]
Distinguish between the two cases: battery disconnected ($Q = \text{const}, V \downarrow$) versus battery remains connected ($V = \text{const}, Q \uparrow$).
(i) Which of the two metals has a higher work function? Justify your answer. [1 Mark]
(ii) Find the slope of the vs graph. Does the slope depend on the nature of the photosensitive material? [1 Mark]
(iii) If incident radiation of wavelength is shone on both metals, which metal will exhibit photoelectric emission? Calculate the maximum kinetic energy of emitted photoelectrons from that metal (in ). [2 Marks]
(i) Work Function Comparison [1 Mark]:
- Work function is given by .
- Since , Metal B has a higher work function ().(ii) Slope of the Graph [1 Mark]:
- Rearranging Einstein's equation gives:
- The slope of the line is .
- Since Planck's constant and electronic charge are universal constants, the slope is universal and completely independent of the nature of the material.(iii) Emission & Kinetic Energy for [2 Marks]:
1. Energy of incident photon:
2. Work function of Metal A:
3. Work function of Metal B:
4. Since , only Metal A will exhibit photoelectric emission ( for Metal B).
5. Maximum kinetic energy from Metal A:
The slope of the $V_0 - \nu$ graph is always $h/e$ for all photosensitive metals. Lines for different metals are strictly parallel.
1. Gauss's Law Statement [1 Mark]:
- The total electric flux through any closed Gaussian surface in free space is equal to times the total charge enclosed by that surface:
2. Derivation for Infinite Line Charge [4 Marks]:
- Consider an infinitely long straight wire carrying uniform linear charge density .
- By cylindrical symmetry, the electric field is directed radially outward perpendicular to the wire.
- Choose a cylindrical Gaussian surface of radius and length coaxial with the wire.
- Flux through the two circular flat end caps:
- Flux through the curved cylindrical surface:
- Total charge enclosed inside the Gaussian cylinder:
- Applying Gauss's law:
In vector notation: .
Alternative Option Solution:
1. Electric Dipole Moment [1 Mark]:- , directed from negative charge to positive charge .
2. Potential at [3 Marks]:
- Potential due to dipole of length :
3. Special Cases [1 Mark]:
- (i) Axial point ( or ): .
- (ii) Equatorial point (): .
State explicitly why flux through circular caps is zero: $\vec{E}$ is perpendicular to cap normal $d\vec{A}$.
(i) Using phasor diagram method, derive an expression for the impedance and the phase angle between voltage and current.
(ii) State the condition for resonance in this circuit and derive the expression for resonant angular frequency .OR(b)
(i) Describe the construction, working principle, and energy losses in a step-up transformer.
(ii) A step-up transformer converts into . If the primary coil has turns, find the number of turns in the secondary coil.
1. Phasor Diagram & Impedance [3 Marks]:
- Current flows common to all components.
- Voltage across resistor: in phase with .
- Voltage across inductor: leading by , where .
- Voltage across capacitor: lagging by , where .
- Net reactive voltage is along vertical phasor axis.
- By Pythagoras theorem on the voltage phasor triangle:
- Impedance :
- Phase angle :
2. Resonance Condition [2 Marks]:
- Resonance occurs when current amplitude is maximum, which requires minimum impedance .
- This occurs when inductive reactance equals capacitive reactance:
- Resonant angular frequency:
Alternative Option Solution:
1. Transformer Principle & Construction [3 Marks]:- Works on mutual induction between two magnetically coupled coils wound on a laminated soft iron core.
- Turns ratio: .
- Energy losses: Copper loss (), Eddy current loss (minimized by laminations), Hysteresis loss (minimized by soft iron), and Flux leakage.
2. Numerical [2 Marks]:
- .
At resonance, impedance is purely resistive ($Z = R$), current is in phase with voltage (power factor $\cos\phi = 1$), and current amplitude is maximum.
1. Ray Diagram through Prism [1.5 Marks]:
- Ray incident at angle on first face , refracts at angle along , and emerges from second face at angle of emergence with internal angle .
2. Prism Angles Relations [1.5 Marks]:
- In quadrilateral , .
- In , .
- Total deviation: .
3. Minimum Deviation Condition [2 Marks]:
- At minimum deviation , by symmetry: and .
- Therefore:
- Applying Snell's law at the first refracting face ():
This is the celebrated Prism Formula.
Alternative Option Solution:
1. Interference Conditions [1.5 Marks]:- Constructive interference (Bright fringe): Path difference , where
- Destructive interference (Dark fringe): Path difference , where
2. Fringe Width Derivation [3.5 Marks]:
- Let two coherent slits be separated by distance , and screen placed at distance .
- Path difference at point at distance from central maximum:
- Position of bright fringe: .
- Fringe width :
At minimum deviation, the refracted ray inside the prism travels parallel to the base of the prism for an equilateral/isosceles prism.