(a) reacts with Hinsberg's reagent to form a product soluble in an alkali.
(b) on reaction with nitrous acid, produces nitrogen gas.
(c) reacts with benzenesulphonyl chloride to form a product that is insoluble in alkali.
(d) does not react with Hinsberg's reagent.
1. First step: Ammonolysis of ethyl chloride yields ethylamine (a primary amine):
2. Second step: Reaction with 1 mole of methyl chloride yields ethylmethylamine (a secondary amine):
3. Hinsberg Test: A secondary amine reacts with benzenesulphonyl chloride () to form an N,N-disubstituted benzenesulphonamide (). Because this sulfonamide has no replaceable acidic hydrogen atom on the nitrogen, it is insoluble in aqueous alkali.
Primary amines form sulfonamides with an acidic hydrogen (soluble in KOH/NaOH); secondary amines form sulfonamides without acidic hydrogen (insoluble in alkali); tertiary amines do not react with Hinsberg's reagent.
(a)
(b)
(c)
(d)
Dipole moment is defined as the product of charge magnitude and bond length (). Although fluorine is more electronegative than chlorine (), the bond length is exceptionally small () compared to the bond length (). The greater bond length more than compensates for the slightly smaller charge separation, resulting in .
This is a classic NCERT exception. Students often erroneously choose $\text{CH}_3\text{F}$ solely due to electronegativity, forgetting the contribution of bond distance $d$.
| :--- | :--- |
| (i) Actinoid having configuration | (A) |
| (ii) Lanthanoid which has configuration in oxidation state | (B) |
| (iii) Lanthanoid which shows oxidation state | (C) |(a) (i)-(C), (ii)-(B), (iii)-(A)
(b) (i)-(C), (ii)-(A), (iii)-(B)
(c) (i)-(A), (ii)-(B), (iii)-(C)
(d) (i)-(B), (ii)-(A), (iii)-(C)
- (i) Curium (Cm, ): Has electronic configuration (half-filled subshell stability) (C).
- (ii) Lutetium (Lu, ): Has ground state . In state, it loses giving (B).
- (iii) Cerium (Ce, ): Has ground state . It loses all 4 outer electrons to attain stable noble gas configuration , readily exhibiting oxidation state (A).
Ce(IV) in aqueous solution is a good oxidizing agent because it tends to revert to the more stable $+3$ lanthanoid oxidation state.
(a) 1 = Bromomethane, 2 = 2-Bromobutane, 3 = 1-Bromobutane, 4 = 2-Bromo-2-methylpropane
(b) 1 = 1-Bromobutane, 2 = 2-Bromo-2-methylpropane, 3 = 2-Bromobutane, 4 = Bromomethane
(c) 1 = Bromomethane, 2 = 1-Bromobutane, 3 = 2-Bromo-2-methylpropane, 4 = 2-Bromobutane
(d) 1 = Bromomethane, 2 = 2-Bromo-2-methylpropane, 3 = 2-Bromobutane, 4 = 1-Bromobutane
1. Molecular Mass Factor: has the lowest molecular mass and surface area, hence lowest boiling point (Compound 1).
2. Branching Factor for Isomers (): For isomeric alkyl halides, boiling point decreases with branching because branching makes the molecule spherical, decreasing the surface area and van der Waals forces.
- 2-Bromo-2-methylpropane (tertiary, maximum branching): lowest bp among isomers () Compound 2.
- 2-Bromobutane (secondary): intermediate bp () Compound 3.
- 1-Bromobutane (primary, straight chain): highest surface area and bp () Compound 4.
Boiling point rules: (1) Increases with increasing molecular mass/chain length. (2) Decreases with increasing branching for structural isomers.
(a)
(b)
(c)
(d)
1. From the unit of rate constant ( in ), the reaction is zero-order.
2. For a zero-order reaction, the half-life formula is:
3. Substituting the given values:
Always check the units of $k$ to determine reaction order! Many students incorrectly use the first-order formula $t_{1/2} = 0.693/k$.
(a) Two molecules of ethanoic acid
(b) Benzoic acid and ethanoic acid
(c) Two molecules of benzoic acid
(d) Phenol and ethanoic acid
Benzoic ethanoic anhydride is a mixed anhydride. Nucleophilic acyl substitution by water cleaves the central oxygen bridge:
Yielding one molecule of benzoic acid and one molecule of ethanoic (acetic) acid.
Acid anhydrides on hydrolysis with water yield their parent carboxylic acids.
(a)
(b)
(c)
(d)
1. Precipitation of 1 mole of per mole of complex indicates that only 1 chlorine atom is present in the outer ionization sphere as a free chloride ion.
2. The remaining 2 chlorine atoms and all 4 molecules are coordinated to cobalt in the inner coordination sphere to satisfy coordination number 6:
3. In aqueous solution, this complex dissociates into 2 ions ( complex cation chloride anion), functioning as a electrolyte.
According to Werner's theory, only ions present outside the square brackets (secondary valence satisfied inside) ionize in aqueous solution.
(a) Starch
(b) Cellulose
(c) Sucrose
(d) Maltose
- Cellulose is a straight-chain polysaccharide composed entirely of -D-glucopyranose units linked by glycosidic bonds.
- Starch is composed of -D-glucose (amylose with and amylopectin with and branch linkages).
- Maltose is a disaccharide of two -D-glucose units.
- Sucrose is composed of -D-glucose and -D-fructose.
Human digestive enzymes can hydrolyze $\alpha$-glycosidic bonds (in starch and glycogen) but cannot hydrolyze $\beta$-glycosidic bonds (in cellulose).
(a)
(b)
(c)
(d)
Paramagnetic character is determined by the number of unpaired electrons () using the spin-only formula :
- ():
- ():
- (): unpaired electrons
- (): unpaired electrons
Therefore, the increasing order of paramagnetism is: .
Do not count total $d$-electrons; count unpaired electrons in degenerate $d$-orbitals (Hund's rule).
(a) It completes in time
(b) It completes in time
(c) It completes in finite time
(d) It never goes to completion in finite time ()
For a first-order reaction, the integrated rate equation is:
For completion, the remaining reactant concentration must equal zero ():
Because an exponential decay asymptotically approaches zero, a first-order reaction theoretically never reaches completion in finite time.
Contrast with zero-order reactions, which complete in finite time $t = [R]_0 / k$.
(a) Nitrobenzene
(b) Toluene
(c) Anisole
(d) Chlorobenzene
Nitrobenzene does not undergo Friedel-Crafts reactions because:
1. The group is a very strongly deactivating group due to its powerful and effects, which severely withdraws electron density from the benzene ring.
2. The nitro group acts as a Lewis base and coordinates with the Lewis acid catalyst , deactivating the catalyst and preventing generation of electrophiles.
Nitrobenzene is so unreactive towards Friedel-Crafts electrophilic attacks that it is commonly used as a solvent for Friedel-Crafts reactions of other compounds.
(a)
(b)
(c)
(d)
Aldehydes and methyl ketones readily undergo reversible nucleophilic addition with saturated sodium hydrogen sulphite solution to form white crystalline bisulphite addition compounds:
Carboxylic acid derivatives such as esters (b), amides (c), and acyl chlorides (d) undergo nucleophilic acyl substitution rather than stable nucleophilic addition.
Bisulphite addition compounds are water-soluble solids that regenerate the pure carbonyl compound upon treatment with dilute mineral acid or base (used for purification).
Reason (R): Alkyl halides have greater polarity and higher molecular mass, leading to stronger dipole-dipole interactions and London dispersion forces.Select the correct option:
(a) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).
(b) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
(c) Assertion (A) is true but Reason (R) is false.
(d) Assertion (A) is false but Reason (R) is true.
Alkyl halides are polar molecules due to the electronegativity difference between carbon and halogen atoms (), which gives rise to intermolecular dipole-dipole attractions in addition to enhanced London dispersion forces. Non-polar alkanes possess only weak dispersion forces. Therefore, more thermal energy is needed to break the intermolecular forces in haloalkanes.
Boiling points follow the order: $\text{R-I} > \text{R-Br} > \text{R-Cl} > \text{R-F} > \text{R-H}$ for the same alkyl group.
Reason (R): According to Nernst equation, .Select the correct option:
(a) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).
(b) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
(c) Assertion (A) is true but Reason (R) is false.
(d) Assertion (A) is false but Reason (R) is true.
1. From the Nernst equation for the Daniell cell:
Reason (R) is factually correct.
2. As increases, the ratio increases, which increases the subtracted logarithmic term, causing to decrease, not increase. Hence Assertion (A) is false.
Remember: Increasing anode ion concentration $[\text{Zn}^{2+}]$ decreases cell EMF; increasing cathode ion concentration $[\text{Cu}^{2+}]$ increases cell EMF.
Reason (R): The oxidation state of manganese changes from in to in in acidic solution.Select the correct option:
(a) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).
(b) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
(c) Assertion (A) is true but Reason (R) is false.
(d) Assertion (A) is false but Reason (R) is true.
1. Assertion (A) is true: is a very strong oxidizing agent in acidic medium with a high standard reduction potential ().
2. Reason (R) is true: The half-reaction in acidic medium is , involving a 5-electron reduction ().
3. However, Reason (R) simply states the change in oxidation number; the root thermodynamic cause of its powerful oxidizing capacity is its high positive electrode potential () and favorable reduction thermodynamics.
Compare $E^\circ$ values: In acidic medium $E^\circ = +1.51\text{ V}$ ($5e^-$ change), in neutral/alkaline medium $E^\circ = +0.56\text{ V}$ ($3e^-$ change to $\text{MnO}_2$).
Reason (R): A non-volatile solute occupies part of the surface area, which decreases the vapor pressure of the solution at a given temperature.Select the correct option:
(a) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).
(b) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
(c) Assertion (A) is true but Reason (R) is false.
(d) Assertion (A) is false but Reason (R) is true.
1. Boiling occurs when the vapor pressure of a liquid equals the external atmospheric pressure.
2. When a non-volatile solute is dissolved, non-volatile solute molecules occupy part of the liquid surface, decreasing the rate of solvent vaporization and lowering the vapor pressure at all temperatures.
3. Consequently, the solution must be heated to a higher temperature so that its reduced vapor pressure rises to equal the external atmospheric pressure. Hence, Reason (R) correctly explains Assertion (A).
Elevation in boiling point $\Delta T_b = K_b m$ is directly caused by the lowering of vapor pressure $\Delta P$ described by Raoult's law.
(b) Chloroform (b.p. ) and acetone (b.p. ) are mixed to form an azeotrope. The mole fraction of acetone in this mixture is . Predict whether the boiling point of the resulting azeotrope will be (i) , (ii) , or (iii) . Defend your answer with scientific reasons.OR(II) (a) A sealed carbonated soda bottle goes flat (loses its fizz) faster when opened in Srinagar than in Delhi. Is this statement scientifically correct? Why or why not?
(b) How does adding sugar or salt in high concentration increase the shelf life of preserved foods (like canned fruits and pickles)?
Primary Option Solution:
(I) (a) Henry's Law Constant & Gas Solubility:- According to Henry's Law: , where is the mole fraction (solubility) of the gas in liquid.
- Solubility is inversely proportional to Henry's law constant ().
- Since increases from to with increasing temperature, the solubility of nitrogen gas decreases.(I) (b) Azeotrope Boiling Point Prediction:
- Prediction: (ii) .
- Reasoning: A mixture of chloroform and acetone shows negative deviation from Raoult's law due to strong intermolecular hydrogen bonding formed between the hydrogen of chloroform and the carbonyl oxygen of acetone ().
- Negative deviation causes a decrease in total vapor pressure, leading to the formation of a maximum boiling azeotrope, whose boiling point () is higher than that of both individual components ( and ).
Alternative Option Solution:
(II) (a) Soda Fizz in Srinagar vs Delhi:- Yes, the statement is correct.
- Reasoning: Srinagar is situated at a high altitude (pprox 1585\text{ m}) where the ambient atmospheric pressure is significantly lower than in Delhi (pprox 216\text{ m}). By Henry's Law, the solubility of a gas is directly proportional to its partial pressure (). Because atmospheric pressure is lower in Srinagar, the equilibrium dissolved concentration is lower, causing gas to escape faster and making the soda go flat more rapidly.(II) (b) Food Preservation by Sugar/Salt:
- Concentrated sugar syrup or brine acts as a hypertonic solution.
- When bacteria or fungi come into contact with the preserved food, water is drawn out from the bacterial cells by exosmosis across their semipermeable cell membrane.
- The bacterial cells shrivel, undergo plasmolysis, and cannot survive or reproduce, preventing food spoilage.
Negative deviation from Raoult's law $\implies$ minimum vapor pressure $\implies$ maximum boiling azeotrope. Positive deviation $\implies$ minimum boiling azeotrope.
(b) Name the transition metal or coordination center present in:
(i) Haemoglobin
(ii) Vitamin
Model Answer:
1. (a) IUPAC Name:- Cation: Potassium
- Anionic Complex Sphere:
- Ligands: diaqua (for ) and dioxalato (for ), arranged alphabetically:
diaquadioxalato- Oxidation state of Cr:
- Central metal in anion:
chromate(III)- Water of crystallization:
hydrate- (i) Haemoglobin: Iron (Fe) (present as coordinated in an iron-porphyrin complex).
- (ii) Vitamin (Cyanocobalamin): Cobalt (Co) (coordinated in a corrin ring).
Do not omit the oxidation state in Roman numerals `(III)` or forget the `-ate` suffix for anionic complexes.
(Given: )
(a) Write the formal cell representation for the galvanic cell.
(b) Name the carriers of electrical current through the salt bridge.
(c) Write the chemical oxidation reaction occurring at the anode and the overall cell reaction.
Model Answer:
1. (a) Formal Cell Representation:Since , magnesium has greater oxidation tendency and acts as the anode, while silver acts as the cathode:
Electrical current through the salt bridge is conducted by mobile ions (cations migrating towards the cathode compartment, and anions migrating towards the anode compartment).3. (c) Electrode Reactions:
- Anode Reaction (Oxidation):
- Cathode Reaction (Reduction):
- Overall Net Cell Reaction:
Standard cell notation convention: Anode on the left (oxidation: solid | ion), double vertical lines for salt bridge, cathode on the right (reduction: ion | solid).
(a)
(b)
(c)
Model Answer (All Three Reactions Solved):
1. (a) Reaction with Potassium Cyanide:- is an ambident nucleophile. is predominantly ionic, so the attack takes place predominantly through carbon because C-C bond () is more stable than C-N bond ().
- Electrophilic addition follows Markovnikov's rule where attaches to the carbon with more hydrogen atoms to form the more stable secondary carbocation intermediate:
- -elimination yields the more highly substituted, more stable alkene as the major product (Zaitsev's rule):
Remember the contrasting behavior of cyanide: $\text{KCN}$ (ionic) gives alkyl cyanide (nitrile) as major product; $\text{AgCN}$ (covalent) gives alkyl isocyanide as major product.
Model Answer:
1. Type and Position of Carbonyl Group:- Type: Aldehyde group ().
- Position: At the terminal carbon atom of the open chain.2. Supporting Chemical Evidence:
- While glucose reacts with hydroxylamine to form a monoxime and with to form a cyanohydrin (confirming a carbonyl group), reaction with a mild oxidizing agent like bromine water () selectively oxidizes the aldehyde group to a carboxylic acid group without attacking the alcohol groups or cleaving carbon bonds, yielding the six-carbon monocarboxylic acid gluconic acid:
This selective oxidation conclusively proves that the carbonyl group is an aldehydic group situated at .
Do not confuse bromine water oxidation (oxidizes only $-\text{CHO}$ to yield gluconic acid) with concentrated nitric acid oxidation (oxidizes both $-\text{CHO}$ and primary alcohol $-\text{CH}_2\text{OH}$ to yield saccharic acid).
(b) Write the expression for the limiting molar conductivity of aluminium sulphate at infinite dilution according to Kohlrausch's law.
Model Answer:
1. (a) Electrolysis of Aqueous :- At Cathode (Reduction): Copper ions have higher reduction potential () than water (), so copper metal deposits:
- At Anode (Oxidation): Due to oxygen overpotential, chloride ions oxidize preferentially over water to release chlorine gas:
- At Cathode: Copper metal deposits: .
- At Anode: Concentrated sulphate ions oxidize to peroxodisulphate ions:
According to Kohlrausch's law of independent migration of ions, the limiting molar conductivity of an electrolyte is the sum of the individual contributions of its constituent ions:
Do not forget the stoichiometric coefficients in Kohlrausch's law: 2 for $\text{Al}^{3+}$ and 3 for $\text{SO}_4^{2-}$.
(a) The lowest oxide of a transition metal is basic, while its highest oxide is acidic.
(b) Chromium is a very hard metal with a high melting point, while mercury is a liquid metal at room temperature.
(c) The first ionisation enthalpy of elements across the 3d transition series does not increase as sharply with atomic number as it does across main group elements.
Model Answer:
1. (a) Acid-Base Nature of Transition Metal Oxides:- In lower oxides (low oxidation state, e.g. ), the metal has low electronegativity, high electropositive character, and unshared valence electrons available for donation, resulting in predominantly ionic bonding and basic behavior.
- In higher oxides (high oxidation state, e.g. ), the metal has high charge density and strongly attracts oxygen electrons, forming predominantly covalent bonds without valence electrons for donation; it acts as a Lewis acid by accepting electron pairs, showing acidic behavior.2. (b) Chromium vs Mercury Physical States:
- Chromium (): Has 6 unpaired electrons per atom, leading to extensive interatomic overlap and exceptionally strong metallic bonding, making chromium a hard solid with a high melting point ().
- Mercury (): Has completely filled and orbitals with zero unpaired electrons (). Furthermore, the electrons are inert and tightly held due to relativistic contraction, resulting in extremely weak metallic bonding and causing mercury to remain liquid at room temperature.3. (b) 3d Series Ionisation Enthalpy Variation:
As the atomic number increases across the 3d series, the increase in nuclear charge (which tends to increase ionisation enthalpy) is largely counterbalanced by the shielding effect of successively added electrons in the inner subshell. Consequently, the effective nuclear charge increases only slightly, resulting in a gentle, gradual rise in ionisation enthalpy.
Transition metal hardness, melting point, and enthalpy of atomization all correlate directly with the number of unpaired d-electrons involved in metallic bonding.
(b) Why does benzoic acid exist as a dimer in non-polar aprotic solvents like benzene?
(c) Benzene reacts with methyl chloride in the presence of anhydrous to form toluene via Friedel-Crafts alkylation. What is the expected outcome if benzene is replaced by benzoic acid? Give reason.OR(II) An organic compound 'X' does not undergo self aldol condensation. However, compound 'X' reacts with compound 'Y' in the presence of a strong base to form 1,3-diphenylprop-2-en-1-one.
(a) Identify organic compounds 'X' and 'Y'.
(b) Write the chemical equation for the cross-aldol condensation reaction.
(c) Give one simple chemical test to distinguish between 'X' and 'Y'.
Primary Option Solution:
(I) (a) Étard Reaction of -Nitrotoluene:Oxidation of the benzylic methyl group with chromyl chloride () in yields a chromium complex intermediate, which on aqueous acidic hydrolysis gives -nitrobenzaldehyde:
In aprotic non-polar solvents (like benzene), benzoic acid undergoes extensive intermolecular hydrogen bonding between the carbonyl oxygen of one molecule and the hydroxyl hydrogen of another, forming a stable cyclic dimer:
- Expected Outcome: No reaction occurs (Friedel-Crafts alkylation fails).
- Reason: The carboxyl group () is a strongly deactivating group that depletes electron density from the benzene ring. Furthermore, the Lewis acid catalyst binds directly to the lone pairs on the carboxyl oxygen atom, poisoning the catalyst.
Alternative Option Solution:
(II) Cross-Aldol Condensation:1. (a) Identification:
- Compound 'X' (no -hydrogen): Benzaldehyde ().
- Compound 'Y' (contains -hydrogens): Acetophenone ().2. (b) Chemical Equation:
- Tollens' Test: Benzaldehyde (X) reduces ammoniacal silver nitrate solution (Tollens' reagent) to form a shining silver mirror. Acetophenone (Y), being a ketone, does not reduce Tollens' reagent.
- Alternatively, the Iodoform Test: Acetophenone gives a yellow precipitate of with due to the presence of a group, whereas benzaldehyde gives no precipitate.
Do not forget that both $-\text{NO}_2$ and $-\text{COOH}$ groups deactivate the aromatic ring and prevent Friedel-Crafts alkylation/acylation.
(b) Classify the proteins Keratin and Insulin into fibrous or globular proteins, and differentiate between them on the basis of their secondary structure, solubility in water, and biological function.
Model Answer:
1. (a) Possible Dipeptides:Condensation between the carboxyl group of one amino acid and the amino group of another forms a peptide bond ():
- Dipeptide 1 (Glycylalanine, Gly-Ala): Formed when the carboxyl group of glycine reacts with the amino group of alanine:
- Dipeptide 2 (Alanylglycine, Ala-Gly): Formed when the carboxyl group of alanine reacts with the amino group of glycine:
- Keratin: Fibrous Protein
- Structure: Linear polypeptide chains running parallel, held together by strong hydrogen and disulfide bonds to form fiber-like structures.
- Solubility: Insoluble in water.
- Function: Structural component of hair, nails, and wool.
- Insulin: Globular Protein
- Structure: Polypeptide chains coil around each other to form compact, three-dimensional spherical shapes.
- Solubility: Soluble in water.
- Function: Hormone regulating glucose metabolism in blood.
Conventionally, peptides are written with the free N-terminal amino acid on the left and the free C-terminal carboxylic acid on the right.
(a) At ()
(b) At ()
Identify the major product formed at each temperature and specify the reaction mechanism ( vs ) followed in each case.
Model Answer:
1. (a) At ():- Major Product: Ethoxyethane (Diethyl ether, ).
- Mechanism: Bimolecular Nucleophilic Substitution ().
- Explanation: Protonated ethanol is attacked by a second unprotonated ethanol molecule in a concerted bimolecular displacement step:
- Major Product: Ethene ().
- Mechanism: Unimolecular Elimination ().
- Explanation: At higher temperatures, loss of water from protonated ethanol forms an ethyl carbocation, followed by rapid elimination of a -proton by base to form the alkene:
Remember: Lower temperature ($140^\circ\text{C}$) favors bimolecular substitution to ether; higher temperature ($170^\circ\text{C}$) provides the thermal activation energy needed for $\beta$-elimination to alkene.
(a) Identify compound 'A' and justify why it is the most reactive.
(b) Write the step-by-step reaction mechanism for the hydrolysis of compound 'A'.
Model Answer:
1. (a) Identification of Compound 'A':- Compound 'A': 2-Chloro-2-methylpropane (tert-butyl chloride, ).
- Justification: The rate-determining step in an reaction is the ionization of the carbon-halogen bond to form a carbocation intermediate. The tertiary carbocation intermediate formed by compound 'A', , is stabilized by 9 hyperconjugative -hydrogens and the inductive () effects of three methyl groups. Because carbocation stability governs reactivity, compound 'A' is the most reactive.2. (b) Two-Step Mechanism:
- Step 1: Generation of Carbocation (Slow, Rate-Determining Step):
- Step 2: Nucleophilic Attack by Hydroxide Ion (Fast Step):
In $S_N1$, rate $= k[\text{substrate}]$, independent of nucleophile concentration. The planar geometry of the carbocation leads to racemization in optically active substrates.
is at .
(a) Calculate the standard EMF () of the cell. (Given: and )
(b) What will be the standard electrode potential , if ?
Model Answer:
1. (a) Standard Cell EMF ():- Determine the number of electrons transferred ():
- Oxidation:
- Reduction:
- Thus, .
- At equilibrium at :
- In the overall reaction, is reduced at the cathode, and is oxidized at the anode:
Be vigilant when finding $n$: 2 moles of Al lose $2 \times 3 = 6$ electrons, and 3 moles of $\text{Sn}^{4+}$ gain $3 \times 2 = 6$ electrons, giving $n = 6$.
Case Study 1: Chemical Kinetics & Reaction Mechanism
The dependence of the rate of reaction on the concentration of reactants and temperature is a fundamental tool for establishing reaction mechanisms. For the gas-phase reaction between hydrogen and bromine:experimental measurements reveal that the rate of reaction is directly proportional to the concentration of and to the square root of the concentration of , represented by the rate law:
(a) What is the overall order of this reaction? State the SI units of the rate constant .
(b) By what factor will the rate of reaction increase if the concentration of is increased to 9 times its initial value?
OR
What change in the concentration of will triple the rate of the reaction while keeping constant?
(c) A reaction is experimentally found to follow the rate law . Between the two proposed mechanisms below, which one is consistent with this rate law and why?
- Mechanism 1: (slow); (fast)
- Mechanism 2: (slow); (fast)
Solutions to Case Study 1 Sub-Questions:
(a) Overall Order & Units of :- Overall order .
- Unit of rate constant for order : .
- For :
- Since , if :
The rate of reaction will triple (increase by a factor of 3).
Alternative Option Solution:
- Since , to triple the rate of reaction, the concentration of must be tripled ().(c) Mechanism Consistency:- Mechanism 2 is consistent with the experimental rate law.
- Reason: The slowest elementary step is the rate-determining step (RDS). In Mechanism 2, the slow step is , whose rate depends on bimolecular collision between one molecule of A and one molecule of B: , which perfectly matches the experimental rate law. In contrast, Mechanism 1 would predict , independent of .
Order of a reaction is an experimental quantity that cannot be deduced from the stoichiometric equation. The rate-determining step dictates the overall rate law.
Case Study 2: Acid-Base Strength of Amines
Amines are organic bases due to the presence of an unshared pair of electrons on the nitrogen atom. The basic strength of an aliphatic amine is quantitatively expressed by its value ( in water at ). A lower (or higher ) corresponds to a stronger base. The inductive effect (electronegativity) of substituents significantly affects basicity, as shown in the experimental titration data below for substituted propylamines ():| Substituent 'X' | Electronegativity of X | Substituted Propylamine Compound | | () || :--- | :---: | :--- | :---: | :---: |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |Answer the following questions based on the above passage:
(a) How does increasing the electronegativity of the substituent 'X' affect the value and the basic strength of the substituted propylamine? Explain the chemical reason.
(b) The electronegativity of is . What is the most expected value of ?
(i)
(ii)
(iii)
(iv)
(c) If a substituent with electronegativity is introduced, what is the most suitable expected value?
(i)
(ii)
(iii)
(iv)
Solutions to Case Study 2 Sub-Questions:
(a) Effect of Electronegativity on Basicity:- As the electronegativity of substituent 'X' increases (), the decreases and the increases ().
- Reason: A more electronegative substituent exerts a stronger electron-withdrawing inductive () effect along the carbon chain. This withdraws electron density from the amino nitrogen atom, making its lone pair less available for donation to a proton. Furthermore, the effect destabilizes the conjugate ammonium cation (), thereby decreasing the basic strength.(b) Expected for Electronegativity :
- Correct Option: (iv)
- Reason: Since electronegativity , the must be less than . Among the given options, only is less than .(c) Expected for Electronegativity :
- Correct Option: (iii)
- Reason: An electronegativity of lies between () and (). Therefore, the expected must lie in the range . Option (iii) is the only value in this range.
Basicity trends: Lower $pK_b \implies$ higher $pK_a \implies$ stronger base. Electron-donating groups ($+I$) increase basicity; electron-withdrawing groups ($-I$) decrease basicity.
(i) Write the balanced ionic redox equations for the reactions occurring in test tubes A and B.
(ii) State the color changes observed in each test tube.
(b) Consider the coordination complex .
(i) Write the hybridization and magnetic behavior of this complex according to Valence Bond Theory.
(ii) Why does it form an inner orbital low-spin complex?OR(II) (a) Complete the following table describing the transition metal complex and :
(i) Central metal ion and oxidation state in
(ii) Number of unpaired electrons and magnetic character in
(iii) Hybridization and geometry of
(iv) Hybridization and geometry of
(b) What type of structural or optical isomerism is exhibited by the complex ? Draw its stereoisomers.
Primary Option Solution:
(I) (a) Permanganate Redox Reactions:1. Test Tube A (Oxidation of Iodide):
- Observation: Purple color of disappears, and solution turns brown due to liberated iodine ().2. Test Tube B (Oxidation of Oxalate):
- Observation: Purple color decolourizes with brisk effervescence of colorless gas.(I) (b) Coordination Complex :
1. Cobalt ground state: . In , configuration is .
2. is a strong field ligand. It causes pairing of the six electrons into three orbitals: , vacating two inner orbitals ( and ).
3. These two empty orbitals hybridize with one and three orbitals to form hybridization.
4. Magnetic Behavior: All electrons are paired (), so the complex is diamagnetic.
5. Inner Orbital Complex: It is an inner orbital (low-spin) complex because the crystal field splitting energy exceeds the pairing energy ().
Alternative Option Solution:
(II) (a) Complexes Analysis:1. For :
- Central metal ion: (Oxidation state ).
- Fluoride () is a weak field ligand (), so electrons in do not pair up: .
- Number of unpaired electrons: .
- Magnetic nature: Paramagnetic.
- Hybridization: Uses outer orbitals (outer orbital complex).
- Geometry: Octahedral.2. For :
- is . Cyanide () is a strong field ligand that forces pairing of the two unpaired electrons, vacating one orbital.
- Hybridization: .
- Geometry: Square planar (diamagnetic).(II) (b) Isomerism of :
- is an octahedral complex with three symmetrical bidentate ethylenediamine ligands. Because it lacks an alternating axis of symmetry or plane of symmetry, it exhibits optical isomerism.
- It exists as a pair of non-superimposable mirror images: the dextrorotatory ( or ) and laevorotatory ( or ) enantiomers.
Remember the spectrochemical series: $\text{I}^- < \text{Br}^- < \text{Cl}^- < \text{F}^- < \text{H}_2\text{O} < \text{NH}_3 < \text{en} < \text{CN}^- < \text{CO}$. $\text{NH}_3$ and $\text{CN}^-$ are strong field ligands that cause pairing.
(i) The reaction of ethanol with acetyl chloride is carried out in the presence of pyridine.
(ii) Cresols (methylphenols) are less acidic than phenol.
(b) Predict the major ether product formed when 3-methylpentan-2-ol is treated with sodium hydride followed by bromoethane in Williamson synthesis.
(c) Complete the following chemical reactions:
(i)
(ii) OR(II) (a) Which carboxylic acid among formic acid, acetic acid, and benzoic acid undergoes the Hell-Volhard-Zelinsky (HVZ) reaction? Write the chemical equation with reagents.
(b) Arrange the four structural isomers of butanol (butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, 2-methylpropan-2-ol) in increasing order of their acidic strength. Explain the underlying electronic reason.
(c) An organic compound 'A' (Grignard reagent) reacts with organic compound 'B' (ketone) followed by acidic hydrolysis to yield 2-methylbutan-2-ol. Deduce the structures of 'A' and 'B' with chemical equations.
Primary Option Solution:
(I) (a) Explanations:1. Ethanol with acetyl chloride and pyridine:
Pyridine is a tertiary organic base. It reacts with and neutralizes the by-product, shifting the equilibrium forward according to Le Chatelier's principle and preventing reverse acid-catalyzed cleavage.
2. Cresols vs Phenol Acidity:
Methyl groups are electron-releasing groups ( and hyperconjugation). In cresols, the group increases electron density on the phenoxide oxygen, destabilizing the phenoxide anion and making cresols less acidic than phenol.(I) (b) Williamson Synthesis:
Reaction of sodium 3-methylpentan-2-olate with bromoethane yields 2-ethoxy-3-methylpentane:
1. Reimer-Tiemann Reaction:
2. Acid-Catalyzed Hydration of Propene:
Alternative Option Solution:
(II) (a) Hell-Volhard-Zelinsky (HVZ) Reaction:- Acetic acid () contains -hydrogens and undergoes the HVZ reaction. (Formic acid and benzoic acid have no -hydrogens).
- The acidic character of alcohols is due to the polar bond. Alkyl groups are electron-releasing () groups that increase electron density on oxygen, decreasing polarity and destabilizing the alkoxide anion. Basicity of alkoxide increases with alkyl substitution ().
- Increasing Order of Acidic Strength:
- Target molecule: Tertiary alcohol .
- Tertiary alcohols are synthesized by the reaction of a Grignard reagent with a ketone.
- Compound B (Ketone): Butan-2-one ().
- Compound A (Grignard Reagent): Methylmagnesium bromide ().
In Williamson synthesis, the alkyl halide must be primary ($1^\circ$) to avoid competing E2 elimination. Sodium alkoxide can be secondary or tertiary.
(b) The osmotic pressure of an aqueous solution of cane sugar (sucrose) is at in volume . What will be the new osmotic pressure if the solution is diluted 5 times by adding distilled water at the same temperature? How can the osmotic pressure be further reduced without changing volume?OR(II) (a) Why must intravenous (IV) injections be strictly isotonic with blood plasma? What life-threatening consequences occur if a hypertonic or hypotonic solution is injected into a patient's bloodstream?
(b) Phenol (, molar mass ) associates in benzene to form a dimer. When of phenol is dissolved in of benzene, the freezing point depression observed is . Given for benzene is , calculate the van 't Hoff factor and the percentage degree of association of phenol in benzene.
Primary Option Solution:
(I) (a) Freezing Point Depression Comparison:1. Depression in freezing point is a colligative property given by:
2. For Glucose (a non-electrolyte, non-ionizing molecular solute):
3. For (strong electrolyte dissociating into 4 ions: ):
Because has a much higher van 't Hoff factor ( vs ), it produces 4 times as many solute particles in solution. Therefore, exhibits a significantly greater depression in freezing point.(I) (b) Osmotic Pressure Dilution:
1. Osmotic pressure: .
- Initially: .
- On 5-fold dilution: .
2. Since , the osmotic pressure is directly proportional to absolute temperature . Without changing volume, the osmotic pressure can be further reduced by lowering the temperature of the solution.
Alternative Option Solution:
(II) (a) Medical Importance of Isotonic IV Solutions:- Blood cells are enclosed by a semipermeable membrane with osmotic pressure equivalent to aqueous solution (normal saline).
- Hypertonic solution injected: External osmotic pressure exceeds internal cell pressure. Water flows out of red blood cells by exosmosis, causing the cells to shrivel (crenation) and impairing oxygen transport.
- Hypotonic solution injected: External osmotic pressure is lower than inside the cell. Water rushes into red blood cells by endosmosis, causing cells to swell and burst (haemolysis).
- Both conditions are severe medical emergencies, which is why IV fluids must be strictly isotonic.(II) (b) Dimerization & Association Calculation for Phenol:
1. Theoretical Molality of Phenol:
2. Observed Freezing Point Depression:
3. Degree of Association :
For dimerization (), :
The degree of association of phenol in benzene is .
For association, $i < 1$ and $\alpha = \frac{1 - i}{1 - 1/n}$. For dimerization ($n = 2$), $\alpha = 2(1 - i)$.