Chemistry · 043D-043-2025·Delhi Scheme

Jump to:
1
Section A()
1 Mark
Ammonolysis of ethyl chloride followed by reaction of the amine so formed with benzenesulphonyl chloride (Hinsberg's reagent) yields a product that is insoluble in alkali. The amine formed was:
(a) Primary amine
(b) Secondary amine
(c) Tertiary amine
(d) Quaternary ammonium salt
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that secondary amine forms N,NN,N-dialkyl sulphonamide lacking acidic H
+0.5 M
Conclude insoluble in alkali   ⟹  \implies secondary amine (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) Secondary amine
Reasoning:
- Primary amines (RNH2R\text{NH}_2) react with benzenesulphonyl chloride to form NN-alkylbenzenesulphonamide, which has an acidic hydrogen attached to nitrogen and therefore dissolves in aqueous alkali (KOH/NaOH).
- Secondary amines (R2NHR_2\text{NH}) react with benzenesulphonyl chloride to form N,NN,N-dialkylbenzenesulphonamide. This product has no acidic hydrogen attached to the nitrogen atom and is therefore insoluble in alkali.
- Tertiary amines do not react with benzenesulphonyl chloride.
Hence, the amine is a secondary amine.
Chief Examiner Evaluation Report & Pitfalls:

Hinsberg test: $1^\circ$ amine product dissolves in alkali; $2^\circ$ amine product is insoluble; $3^\circ$ amine does not react.

2
Section A()
1 Mark
Which one of the following has the highest dipole moment?
(a) CH3F\text{CH}_3\text{F}
(b) CH3Cl\text{CH}_3\text{Cl}
(c) CH3Br\text{CH}_3\text{Br}
(d) CH3I\text{CH}_3\text{I}
CBSE Official Step-Marking AllocationTotal: 1 M
State that dipole moment μ=q×d\mu = q \times d depends on both charge separation and bond length
+0.5 M
Conclude CH3Cl\text{CH}_3\text{Cl} has highest dipole moment (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) CH3Cl\text{CH}_3\text{Cl}
Reasoning:
Dipole moment is the product of partial charge (qq) and bond length (dd): μ=q×d\mu = q \times d.
Although fluorine is the most electronegative element, the C−F\text{C}-\text{F} bond length is exceptionally small (1.39 A˚1.39\text{ Å}). The larger C−Cl\text{C}-\text{Cl} bond distance (1.78 A˚1.78\text{ Å}) in CH3Cl\text{CH}_3\text{Cl} more than compensates for the smaller electronegativity difference, giving CH3Cl\text{CH}_3\text{Cl} the highest dipole moment (1.860 D1.860\text{ D}) compared to CH3F\text{CH}_3\text{F} (1.847 D1.847\text{ D}).
The order is: CH3I<CH3Br<CH3F<CH3Cl\text{CH}_3\text{I} < \text{CH}_3\text{Br} < \text{CH}_3\text{F} < \text{CH}_3\text{Cl}.
Chief Examiner Evaluation Report & Pitfalls:

This is an exceptional textbook NCERT case where bond length overcompensates for electronegativity difference.

3
Section A()
1 Mark
Match the properties given in Column I with the metals in Column II:
- Column I:
(i) Highest enthalpy of atomization
(ii) Metal with maximum number of oxidation states
(iii) Liquid transition metal at room temperature
- Column II:
(A) Mercury (Hg)
(B) Manganese (Mn)
(C) Vanadium (V)
(a) (i)-(C), (ii)-(B), (iii)-(A)
(b) (i)-(A), (ii)-(B), (iii)-(C)
(c) (i)-(B), (ii)-(A), (iii)-(C)
(d) (i)-(C), (ii)-(A), (iii)-(B)
CBSE Official Step-Marking AllocationTotal: 1 M
Correlate properties: highest atomization →\to V, max oxidation states →\to Mn, liquid metal →\to Hg
+0.5 M
Identify correct matching sequence (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) (i)-(C), (ii)-(B), (iii)-(A)
Reasoning:
- (i) Vanadium (V) has high enthalpy of atomization due to strong metallic bonding involving (n−1)d(n-1)d electrons →\to (C).
- (ii) Manganese (Mn) has electronic configuration [Ar]3d54s2[\text{Ar}]3d^5 4s^2 and exhibits the maximum number of oxidation states from +2+2 to +7+7 →\to (B).
- (iii) Mercury (Hg) has completely filled dd-orbitals (5d106s25d^{10} 6s^2) with no unpaired electrons for metallic bonding, making it a liquid metal at room temperature →\to (A).
Chief Examiner Evaluation Report & Pitfalls:

Manganese exhibits the largest number of oxidation states (+2 to +7) in the 3d transition series.

4
Section A()
1 Mark
Among the isomeric bromoalkanes with molecular formula C4H9Br\text{C}_4\text{H}_9\text{Br}, which one has the lowest boiling point?
(a) 1-Bromobutane
(b) 2-Bromobutane
(c) 1-Bromo-2-methylpropane
(d) 2-Bromo-2-methylpropane
CBSE Official Step-Marking AllocationTotal: 1 M
State relationship: boiling point decreases with increasing branching (spherical shape reduces surface area)
+0.5 M
Select tertiary isomer 2-Bromo-2-methylpropane (d)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (d) 2-Bromo-2-methylpropane
Reasoning:
For isomeric alkyl halides, boiling point decreases with increased branching because branching makes the molecule more spherical, decreasing its surface area and weakening van der Waals intermolecular attractive forces. 2-Bromo-2-methylpropane (tert-butyl bromide) is the most branched spherical isomer, having the minimum surface area and hence the lowest boiling point.
Chief Examiner Evaluation Report & Pitfalls:

Boiling point order of isomeric butyl bromides: primary > secondary > tertiary.

5
Section A()
1 Mark
The initial concentration of reactant RR in the reaction R→PR \to P is 4.62×10−2 mol/L4.62 \times 10^{-2}\text{ mol/L}. The rate constant is k=2.31×10−2 mol L−1s−1k = 2.31 \times 10^{-2}\text{ mol L}^{-1}\text{s}^{-1}. What is the half-life of this reaction?
(a) 1.0 s1.0\text{ s}
(b) 2.0 s2.0\text{ s}
(c) 0.5 s0.5\text{ s}
(d) 30 s30\text{ s}
CBSE Official Step-Marking AllocationTotal: 1 M
Identify zero-order reaction from unit of kk (mol L−1s−1\text{mol L}^{-1}\text{s}^{-1})
+0.5 M
Apply t1/2=[R]0/2k=1.0 st_{1/2} = [R]_0 / 2k = 1.0\text{ s} and select (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) 1.0 s1.0\text{ s}
Working:
Look at the units of rate constant: mol L−1s−1\text{mol L}^{-1}\text{s}^{-1}.
This unit indicates a zero-order reaction (n=0n = 0).
For a zero-order reaction, the half-life is given by:
t1/2=[R]02kt_{1/2} = \frac{[R]_0}{2k}

Substituting given values:
t1/2=4.62×10−2 mol L−12×2.31×10−2 mol L−1s−1=4.62×10−24.62×10−2=1.0 s.t_{1/2} = \frac{4.62 \times 10^{-2}\text{ mol L}^{-1}}{2 \times 2.31 \times 10^{-2}\text{ mol L}^{-1}\text{s}^{-1}} = \frac{4.62 \times 10^{-2}}{4.62 \times 10^{-2}} = 1.0\text{ s}.
Chief Examiner Evaluation Report & Pitfalls:

Always check units of $k$! For first-order it is $\text{s}^{-1}$, but for zero-order it is $\text{mol L}^{-1}\text{s}^{-1}$.

6
Section A()
1 Mark
When benzoic ethanoic anhydride (C6H5COOCOCH3\text{C}_6\text{H}_5\text{COOCOCH}_3) is treated with water, the products obtained are:
(a) Two molecules of benzoic acid
(b) Benzoic acid and ethanoic acid
(c) Two molecules of ethanoic acid
(d) Benzaldehyde and ethanol
CBSE Official Step-Marking AllocationTotal: 1 M
Write hydrolysis equation: C6H5COOCOCH3+H2O→C6H5COOH+CH3COOH\text{C}_6\text{H}_5\text{COOCOCH}_3 + \text{H}_2\text{O} \to \text{C}_6\text{H}_5\text{COOH} + \text{CH}_3\text{COOH}
+0.5 M
Identify products as benzoic acid and ethanoic acid (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) Benzoic acid and ethanoic acid
Reasoning:
Hydrolysis of an unsymmetrical acid anhydride yields the two corresponding parent carboxylic acids:
C6H5COOCOCH3+H2O→C6H5COOH+CH3COOH\text{C}_6\text{H}_5\text{COOCOCH}_3 + \text{H}_2\text{O} \to \text{C}_6\text{H}_5\text{COOH} + \text{CH}_3\text{COOH}

Product: Benzoic acid and ethanoic acid.
Chief Examiner Evaluation Report & Pitfalls:

Acid anhydrides on hydrolysis yield the two carboxylic acids from which they were synthesized.

7
Section A()
1 Mark
A coordination compound on treatment with excess AgNO3\text{AgNO}_3 solution gives 1 mole of AgCl\text{AgCl} precipitate per mole of the compound. The coordination formula is [Co(NH3)4Cl2]Cl[\text{Co}(\text{NH}_3)_4\text{Cl}_2]\text{Cl}. The total number of ions produced per formula unit in aqueous solution is:
(a) 1
(b) 2
(c) 3
(d) 4
CBSE Official Step-Marking AllocationTotal: 1 M
Write ionization: [Co(NH3)4Cl2]Cl→[Co(NH3)4Cl2]++Cl−[\text{Co}(\text{NH}_3)_4\text{Cl}_2]\text{Cl} \to [\text{Co}(\text{NH}_3)_4\text{Cl}_2]^+ + \text{Cl}^-
+0.5 M
Count ions: 1 cation + 1 anion = 2 ions in solution (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) 2
Working:
Ionization in aqueous solution:
[Co(NH3)4Cl2]Cl→aq[Co(NH3)4Cl2]++Cl−[\text{Co}(\text{NH}_3)_4\text{Cl}_2]\text{Cl} \xrightarrow{\text{aq}} [\text{Co}(\text{NH}_3)_4\text{Cl}_2]^+ + \text{Cl}^-

The complex produces:
- 1 complex cation [Co(NH3)4Cl2]+[\text{Co}(\text{NH}_3)_4\text{Cl}_2]^+
- 1 chloride counter-anion Cl−\text{Cl}^-
Total number of ions produced = 1+1=21 + 1 = 2 ions.
Chief Examiner Evaluation Report & Pitfalls:

Only counter-ions outside the coordination bracket $[\dots]$ ionize in aqueous solution.

8
Section A()
1 Mark
Which of the following contains only β\beta-D-glucose as its monomeric unit?
(a) Starch
(b) Cellulose
(c) Glycogen
(d) Maltose
CBSE Official Step-Marking AllocationTotal: 1 M
Recall polysaccharide structures: starch/glycogen are α\alpha-glucose, cellulose is β\beta-glucose
+0.5 M
Select Cellulose (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) Cellulose
Reasoning:
- Starch: polymer composed exclusively of α\alpha-D-glucose units (amylose and amylopectin).
- Glycogen: highly branched polymer composed exclusively of α\alpha-D-glucose units.
- Maltose: disaccharide consisting of two α\alpha-D-glucose units joined by α−(1→4)\alpha-(1\to 4) glycosidic linkage.
- Cellulose: linear straight-chain polysaccharide consisting exclusively of β\beta-D-glucose units joined by β−(1→4)\beta-(1\to 4) glycosidic linkages.
Chief Examiner Evaluation Report & Pitfalls:

Cellulose is non-digestible by humans because human enzymes cannot hydrolyze $\beta-(1\to 4)$ glycosidic bonds.

9
Section A()
1 Mark
Which one of the following sets correctly represents the increase in paramagnetic character among 3d3d transition metal ions?
(a) Ti3+<Fe2+<Cr3+<Mn2+\text{Ti}^{3+} < \text{Fe}^{2+} < \text{Cr}^{3+} < \text{Mn}^{2+}
(b) Cr3+<Ti3+<Fe2+<Mn2+\text{Cr}^{3+} < \text{Ti}^{3+} < \text{Fe}^{2+} < \text{Mn}^{2+}
(c) Mn2+<Fe2+<Cr3+<Ti3+\text{Mn}^{2+} < \text{Fe}^{2+} < \text{Cr}^{3+} < \text{Ti}^{3+}
(d) Ti3+<Cr3+<Fe2+<Mn2+\text{Ti}^{3+} < \text{Cr}^{3+} < \text{Fe}^{2+} < \text{Mn}^{2+}
CBSE Official Step-Marking AllocationTotal: 1 M
Count unpaired electrons: Ti3+(1),Cr3+(3),Fe2+(4),Mn2+(5)\text{Ti}^{3+}(1), \text{Cr}^{3+}(3), \text{Fe}^{2+}(4), \text{Mn}^{2+}(5)
+0.5 M
Order by increasing spin-only magnetic moment μ=n(n+2)\mu = \sqrt{n(n+2)} to get (d)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (d) Ti3+<Cr3+<Fe2+<Mn2+\text{Ti}^{3+} < \text{Cr}^{3+} < \text{Fe}^{2+} < \text{Mn}^{2+}
Working:
Paramagnetic character depends on the number of unpaired electrons (nn):
- Ti3+\text{Ti}^{3+}: [extAr]3d1  ⟹  n=1[ ext{Ar}]3d^1 \implies n = 1
- Cr3+\text{Cr}^{3+}: [extAr]3d3  ⟹  n=3[ ext{Ar}]3d^3 \implies n = 3
- Fe2+\text{Fe}^{2+}: [extAr]3d6  ⟹  n=4[ ext{Ar}]3d^6 \implies n = 4 (one paired pair, 4 unpaired electrons)
- Mn2+\text{Mn}^{2+}: [extAr]3d5  ⟹  n=5[ ext{Ar}]3d^5 \implies n = 5 (half-filled dd-subshell, maximum unpaired electrons)
Increasing order of unpaired electrons: 1<3<4<51 < 3 < 4 < 5.
Therefore, order of paramagnetism is: Ti3+<Cr3+<Fe2+<Mn2+\text{Ti}^{3+} < \text{Cr}^{3+} < \text{Fe}^{2+} < \text{Mn}^{2+}.
Chief Examiner Evaluation Report & Pitfalls:

Do not count total $d$-electrons; count strictly UNPAIRED electrons: $\text{Fe}^{2+}$ is $3d^6$, which has 4 unpaired electrons.

10
Section A()
1 Mark
A first-order reaction has a rate constant k=5.5×10−14 s−1k = 5.5 \times 10^{-14}\text{ s}^{-1}. The half-life of the reaction is:
(a) 1.26×1013 s1.26 \times 10^{13}\text{ s}
(b) 2.52×1013 s2.52 \times 10^{13}\text{ s}
(c) 0.63×1013 s0.63 \times 10^{13}\text{ s}
(d) It never goes to completion
CBSE Official Step-Marking AllocationTotal: 1 M
State first-order half-life formula t1/2=0.693/kt_{1/2} = 0.693 / k
+0.5 M
Compute 0.693/(5.5×10−14)=1.26×1013 s0.693 / (5.5 \times 10^{-14}) = 1.26 \times 10^{13}\text{ s} (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) 1.26×1013 s1.26 \times 10^{13}\text{ s}
Working:
For a first-order reaction:
t1/2=0.693kt_{1/2} = \frac{0.693}{k}

Substituting k=5.5×10−14 s−1k = 5.5 \times 10^{-14}\text{ s}^{-1}:
t1/2=0.6935.5×10−14=0.126×1014 s=1.26×1013 s.t_{1/2} = \frac{0.693}{5.5 \times 10^{-14}} = 0.126 \times 10^{14}\text{ s} = 1.26 \times 10^{13}\text{ s}.
Chief Examiner Evaluation Report & Pitfalls:

For first-order reactions, half-life is strictly independent of the initial concentration.

11
Section A()
1 Mark
Aniline is prepared in the laboratory by the reduction of compound XX using Fe/HCl\text{Fe}/\text{HCl}. Compound XX is:
(a) Nitrobenzene
(b) Benzonitrile
(c) Benzamide
(d) Chlorobenzene
CBSE Official Step-Marking AllocationTotal: 1 M
State reaction: C6H5NO2→Fe/HClC6H5NH2\text{C}_6\text{H}_5\text{NO}_2 \xrightarrow{\text{Fe}/\text{HCl}} \text{C}_6\text{H}_5\text{NH}_2
+0.5 M
Identify starting compound XX as Nitrobenzene (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) Nitrobenzene
Reasoning:
Reduction of nitrobenzene (C6H5NO2\text{C}_6\text{H}_5\text{NO}_2) with iron scrap and hydrochloric acid (Fe/HCl\text{Fe}/\text{HCl}) is the preferred laboratory and industrial method for preparing aniline (C6H5NH2\text{C}_6\text{H}_5\text{NH}_2):
C6H5NO2+6[H]→Fe/HClC6H5NH2+2H2O\text{C}_6\text{H}_5\text{NO}_2 + 6[\text{H}] \xrightarrow{\text{Fe}/\text{HCl}} \text{C}_6\text{H}_5\text{NH}_2 + 2\text{H}_2\text{O}

This method is preferred because FeCl2\text{FeCl}_2 formed gets hydrolyzed to release HCl\text{HCl}, requiring only a small catalytic amount of HCl\text{HCl}.
Chief Examiner Evaluation Report & Pitfalls:

Fe/HCl is preferred over Sn/HCl industrially because the generated $\text{FeCl}_2$ hydrolyzes back to regenerate $\text{HCl}$.

12
Section A()
1 Mark
Which of the following compounds gives an oxime on reaction with hydroxylamine (NH2OH\text{NH}_2\text{OH})?
(a) CH3COOH\text{CH}_3\text{COOH}
(b) CH3CHO\text{CH}_3\text{CHO}
(c) CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}
(d) CH3OCH3\text{CH}_3\text{OCH}_3
CBSE Official Step-Marking AllocationTotal: 1 M
State nucleophilic addition-elimination of carbonyls with hydroxylamine to form oximes
+0.5 M
Identify acetaldehyde CH3CHO\text{CH}_3\text{CHO} as the carbonyl compound (b)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (b) CH3CHO\text{CH}_3\text{CHO}
Reasoning:
Carbonyl compounds (aldehydes and ketones) undergo nucleophilic addition-elimination reactions with hydroxylamine (NH2OH\text{NH}_2\text{OH}) to form oximes:
CH3CHO+H2N−OH→H+CH3CH=N−OH+H2O\text{CH}_3\text{CHO} + \text{H}_2\text{N}-\text{OH} \xrightarrow{\text{H}^+} \text{CH}_3\text{CH}=\text{N}-\text{OH} + \text{H}_2\text{O}

Acetaldehyde forms acetaldoxime. Carboxylic acids, alcohols, and ethers do not give this reaction.
Chief Examiner Evaluation Report & Pitfalls:

Hydroxylamine specifically identifies the presence of a carbonyl group ($>\text{C}=\text{O}$) in aldehydes and ketones.

13
Section A()
1 Mark
Assertion (A): The boiling points of alkyl halides decrease in the order: RI>RBr>RCl>RF\text{RI} > \text{RBr} > \text{RCl} > \text{RF}.
Reason (R): With increase in size and mass of the halogen atom, the magnitude of van der Waals forces of attraction increases.
(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
CBSE Official Step-Marking AllocationTotal: 1 M
Confirm Assertion is true (boiling point order RI>RBr>RCl>RF\text{RI} > \text{RBr} > \text{RCl} > \text{RF})
+0.5 M
Confirm Reason is true and correctly explains (A) via van der Waals forces, selecting (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) Both (A) and (R) are true and (R) is the correct explanation of (A).
Analysis:
- Assertion (A): For a given alkyl group, the boiling points follow the order RI>RBr>RCl>RF\text{RI} > \text{RBr} > \text{RCl} > \text{RF}. Assertion is TRUE.
- Reason (R): Iodine has the largest atomic size and molar mass, resulting in the largest polarizable electron cloud and strongest intermolecular van der Waals forces. Hence, RI\text{RI} requires maximum thermal energy to vaporize. Reason is TRUE.
- Reason (R) correctly explains Assertion (A).
Chief Examiner Evaluation Report & Pitfalls:

Van der Waals forces increase directly with increase in molecular weight and surface area.

14
Section A()
1 Mark
Assertion (A): Transition metals and their compounds exhibit high catalytic activity.
Reason (R): Transition metals can adopt multiple oxidation states and provide large surface areas with vacant dd-orbitals for forming reaction intermediates.
(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
CBSE Official Step-Marking AllocationTotal: 1 M
Verify catalytic ability of transition metals
+0.5 M
Confirm variable oxidation states and surface adsorption mechanisms explain (A), select (a)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) Both (A) and (R) are true and (R) is the correct explanation of (A).
Analysis:
- Transition metals act as excellent catalysts (e.g. V2O5\text{V}_2\text{O}_5 in Contact process, finely divided Fe in Haber's process).
- Their catalytic activity is attributed to: (i) ability to exhibit variable oxidation states to form intermediate complexes, and (ii) presence of partially filled dd-orbitals that adsorb reactant molecules on their surface, lowering the activation energy.
- Both statements are true, and Reason (R) correctly explains Assertion (A).
Chief Examiner Evaluation Report & Pitfalls:

Variable oxidation states allow transition metals to provide alternative pathways with lower activation energy.

15
Section A()
1 Mark
Assertion (A): Glucose does not form a hydrogen sulphite addition product with NaHSO3\text{NaHSO}_3 and does not give Schiff's test.
Reason (R): The open-chain penta-hydroxy aldehyde form of D-glucose exists in equilibrium with two cyclic hemiacetal forms (α\alpha and β\beta), with the cyclic forms predominating.
(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
CBSE Official Step-Marking AllocationTotal: 1 M
State that absence of free −CHO-\text{CHO} group in cyclic hemiacetal structure prevents NaHSO3\text{NaHSO}_3 addition
+0.5 M
Conclude both statements are true and (R) correctly explains (A)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (a) Both (A) and (R) are true and (R) is the correct explanation of (A).
Analysis:
- Assertion (A): Despite having an aldehyde group, glucose fails to give the Schiff's test, does not react with NaHSO3\text{NaHSO}_3, and glucose pentaacetate does not react with hydroxylamine. Assertion is TRUE.
- Reason (R): The −CHO-\text{CHO} group is not free; it forms a cyclic six-membered pyranose ring via intramolecular hemiacetal formation between the −CHO-\text{CHO} at C-1 and the −OH-\text{OH} group at C-5. Because the free −CHO-\text{CHO} concentration is extremely low (<0.5%< 0.5\%), it fails to undergo these typical aldehyde reactions. Reason is TRUE.
- Reason (R) correctly explains Assertion (A).
Chief Examiner Evaluation Report & Pitfalls:

This classic evidence proved that D-glucose exists predominantly as cyclic $\alpha$- and $\beta$-pyranose rings.

16
Section A()
1 Mark
Assertion (A): The half-life for a zero-order reaction is independent of the initial concentration of reactants.
Reason (R): For a zero-order reaction, the rate of reaction is independent of the concentration of reactants.
(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
CBSE Official Step-Marking AllocationTotal: 1 M
Show t1/2=[R]0/2k∝[R]0  ⟹  t_{1/2} = [R]_0 / 2k \propto [R]_0 \implies Assertion is false
+0.5 M
Show Rate =k  ⟹  = k \implies Reason is true, select option (d)
+0.5 M
NCERT / CBSE Model Answer
Correct Option: (d) (A) is false but (R) is true.
Analysis:
- Assertion (A): For a zero-order reaction, t1/2=[R]02kt_{1/2} = \frac{[R]_0}{2k}. Half-life is directly proportional to initial concentration [R]0[R]_0, NOT independent of it! (It is first-order reactions that have concentration-independent half-life). Hence, Assertion (A) is FALSE.
- Reason (R): For a zero-order reaction, Rate=k[R]0=k=constant\text{Rate} = k[R]^0 = k = \text{constant}. The rate is independent of reactant concentration. Hence, Reason (R) is TRUE.
Thus, (A) is false but (R) is true.
Chief Examiner Evaluation Report & Pitfalls:

Never confuse zero-order with first-order half-life! Zero-order: $t_{1/2} \propto [R]_0$. First-order: $t_{1/2} = 0.693/k$ (independent of $[R]_0$).

17
Section B()
Internal Choice (OR)2 Marks
(a) Nitrogen gas is soluble in water. At temperature 293 K293\text{ K}, the value of Henry's constant KHK_H is 76.48 kbar76.48\text{ kbar}, while at 303 K303\text{ K} it is 88.84 kbar88.84\text{ kbar}. Why does nitrogen gas become less soluble in water with an increase in temperature?
(b) A mixture of chloroform and acetone boils at 64.5∘C64.5^\circ\text{C}, whereas pure chloroform boils at 61.2∘C61.2^\circ\text{C} and pure acetone boils at 56∘C56^\circ\text{C}. What type of deviation from Raoult's law does this solution exhibit, and why?
OR
(a) Why do soda bottles go 'flat' faster at high altitudes like Srinagar than at sea level?
(b) Why does adding salt or sugar protect fruits and pickles from bacterial decay?
CBSE Official Step-Marking AllocationTotal: 2 M
(a) State x=p/KHx = p/K_H; increase in KHK_H with temperature decreases solubility
+1 M
(b) Identify negative deviation due to stronger H\text{H}-bonding forming maximum boiling azeotrope
+1 M
NCERT / CBSE Model Answer
Solution:
(a) By Henry's Law, p=KH⋅x  ⟹  x=pKHp = K_H \cdot x \implies x = \frac{p}{K_H}.
The solubility of a gas (xx) is inversely proportional to its Henry's law constant KHK_H. As temperature increases, KHK_H increases (from 76.4876.48 to 88.84 kbar88.84\text{ kbar}), and gas dissolution is an exothermic process (ΔHsol<0\Delta H_{\text{sol}} < 0). By Le Chatelier's principle, solubility decreases with increase in temperature.
(b) The boiling point of the mixture (64.5∘C64.5^\circ\text{C}) is higher than the boiling points of both pure components (61.2∘C61.2^\circ\text{C} and 56∘C56^\circ\text{C}). This indicates that the vapor pressure of the mixture is lower than expected, meaning the solution exhibits negative deviation from Raoult's law and forms a maximum boiling azeotrope. This occurs because hydrogen bonding between chloroform and acetone (textCl3C−H⋯O=C(CH3)2\\text{Cl}_3\text{C}-\text{H} \cdots \text{O}=\text{C}(\text{CH}_3)_2) is stronger than solute-solute and solvent-solvent interactions.

Alternative Option Solution:

(a) Atmospheric pressure is significantly lower at high altitudes (Srinagar). By Henry's Law (S∝pgasS \propto p_{\text{gas}}), the lower partial pressure of CO2\text{CO}_2 above the beverage reduces the solubility of CO2\text{CO}_2, causing dissolved gas to escape faster and the soda to go flat rapidly.
(b) High concentrations of sugar or salt create a hypertonic medium. When bacteria come in contact with this medium, water moves out of the bacterial cells due to osmosis (plasmolysis), causing the bacterial cells to shrivel and die.
Chief Examiner Evaluation Report & Pitfalls:

Maximum boiling azeotrope corresponds to negative deviation; minimum boiling azeotrope corresponds to positive deviation.

18
Section B()
2 Marks
(a) Write the IUPAC name of the complex: K[Cr(H2O)2(C2O4)2]⋅H2O\text{K}[\text{Cr}(\text{H}_2\text{O})_2(\text{C}_2\text{O}_4)_2] \cdot \text{H}_2\text{O}.
(b) What type of isomerism is shown by [Co(NH3)5(SO4)]Br[\text{Co}(\text{NH}_3)_5(\text{SO}_4)]\text{Br} and [Co(NH3)5Br]SO4[\text{Co}(\text{NH}_3)_5\text{Br}]\text{SO}_4?
CBSE Official Step-Marking AllocationTotal: 2 M
(a) Write correct IUPAC name: Potassium diaquadioxalatochromate(III) monohydrate
+1 M
(b) Identify ionization isomerism and explain different ions produced in solution
+1 M
NCERT / CBSE Model Answer
Solution:
(a) IUPAC Name:
- Cation: Potassium
- Complex anion: [Cr(H2O)2(C2O4)2]−[\text{Cr}(\text{H}_2\text{O})_2(\text{C}_2\text{O}_4)_2]^-
- Ligands in alphabetical order: diaqua (for H2O\text{H}_2\text{O}), dioxalato (for C2O42−\text{C}_2\text{O}_4^{2-})
- Oxidation state of Cr: 1+x+2(0)+2(−2)=0  ⟹  x−3=0  ⟹  x=+31 + x + 2(0) + 2(-2) = 0 \implies x - 3 = 0 \implies x = +3.
- Since complex is an anion, metal name ends in '-ate': chromate(III).
- Hydrate: monohydrate.
Potassium diaquadioxalatochromate(III) monohydrate\textbf{Potassium diaquadioxalatochromate(III) monohydrate}
(b) Isomerism:
These two complexes exhibit Ionization isomerism.
They have the same empirical formula but give different ions in aqueous solution:
- [Co(NH3)5(SO4)]Br→aq[Co(NH3)5(SO4)]++Br−[\text{Co}(\text{NH}_3)_5(\text{SO}_4)]\text{Br} \xrightarrow{\text{aq}} [\text{Co}(\text{NH}_3)_5(\text{SO}_4)]^+ + \text{Br}^- (gives yellow precipitate with AgNO3\text{AgNO}_3)
- [Co(NH3)5Br]SO4→aq[Co(NH3)5Br]2++SO42−[\text{Co}(\text{NH}_3)_5\text{Br}]\text{SO}_4 \xrightarrow{\text{aq}} [\text{Co}(\text{NH}_3)_5\text{Br}]^{2+} + \text{SO}_4^{2-} (gives white precipitate with BaCl2\text{BaCl}_2)
Chief Examiner Evaluation Report & Pitfalls:

Alphabetical order of ligands: 'diaqua' precedes 'dioxalato' ('a' comes before 'o').

19
Section B()
2 Marks
Observe the following electrochemical cell:
Zn(s)∣Zn2+(1 M) ∣∣ Cu2+(1 M)∣Cu(s)\text{Zn}(s) | \text{Zn}^{2+}(1\text{ M}) \, || \, \text{Cu}^{2+}(1\text{ M}) | \text{Cu}(s)

(a) Write the cell reaction and calculate standard emf of the cell (Ecell∘E^\circ_{\text{cell}}). Given: EZn2+/Zn∘=−0.76 VE^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0.76\text{ V}, ECu2+/Cu∘=+0.34 VE^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0.34\text{ V}.
(b) What will happen if an external opposing potential Eext>1.1 VE_{\text{ext}} > 1.1\text{ V} is applied to this cell?
CBSE Official Step-Marking AllocationTotal: 2 M
(a) Write net cell reaction and compute Ecell∘=0.34−(−0.76)=1.10 VE^\circ_{\text{cell}} = 0.34 - (-0.76) = 1.10\text{ V}
+1 M
(b) State cell behaves as electrolytic cell with reversed current direction
+1 M
NCERT / CBSE Model Answer
Solution:
(a)
- Anode (oxidation): Zn(s)→Zn2+(aq)+2e−\text{Zn}(s) \to \text{Zn}^{2+}(aq) + 2e^-
- Cathode (reduction): Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \to \text{Cu}(s)
- Net Cell Reaction: Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\text{Zn}(s) + \text{Cu}^{2+}(aq) \to \text{Zn}^{2+}(aq) + \text{Cu}(s)
- Standard emf:
Ecell∘=Ecathode∘−Eanode∘=0.34 V−(−0.76 V)=+1.10 V.E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V}.
(b) When Eext>1.1 VE_{\text{ext}} > 1.1\text{ V}:
The cell reaction is reversed, and the electrochemical cell acts as an electrolytic cell.
Electrons flow from Cu to Zn, current flows from Zn to Cu, zinc is deposited at the zinc electrode, and copper dissolves from the copper electrode.
Chief Examiner Evaluation Report & Pitfalls:

When $E_{\text{ext}} = 1.1\text{ V}$, current stops ($I=0$). When $E_{\text{ext}} > 1.1\text{ V}$, it functions as an electrolytic cell.

20
Section B()
2 Marks
Complete the following organic reactions by writing the major product in each case:
(a) CH3−CH=CH2+HBr→Peroxide…\text{CH}_3-\text{CH}=\text{CH}_2 + \text{HBr} \xrightarrow{\text{Peroxide}} \dots
(b) CH3CH2Cl+AgCN→aq. ethanol…\text{CH}_3\text{CH}_2\text{Cl} + \text{AgCN} \xrightarrow{\text{aq. ethanol}} \dots
CBSE Official Step-Marking AllocationTotal: 2 M
(a) Write anti-Markovnikov product: 1-Bromopropane (CH3CH2CH2Br\text{CH}_3\text{CH}_2\text{CH}_2\text{Br})
+1 M
(b) Write isocyanide product: Ethyl isocyanide (CH3CH2NC\text{CH}_3\text{CH}_2\text{NC})
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Addition of HBr\text{HBr} in the presence of organic peroxides follows the anti-Markovnikov rule (Kharasch effect), where the bromine free radical attacks the less substituted carbon atom:
CH3−CH=CH2+HBr→Benzoyl PeroxideCH3−CH2−CH2Br\text{CH}_3-\text{CH}=\text{CH}_2 + \text{HBr} \xrightarrow{\text{Benzoyl Peroxide}} \text{CH}_3-\text{CH}_2-\text{CH}_2\text{Br}

Major Product: 1-Bromopropane.
(b) Silver cyanide (AgCN\text{AgCN}) is predominantly covalent in nature. Nitrogen possesses an unshared pair of electrons and acts as the nucleophilic center:
CH3CH2Cl+AgCN→CH3CH2NC+AgCl\text{CH}_3\text{CH}_2\text{Cl} + \text{AgCN} \to \text{CH}_3\text{CH}_2\text{NC} + \text{AgCl}

Major Product: Ethyl isocyanide (or ethyl carbylamine).
Chief Examiner Evaluation Report & Pitfalls:

Contrast: KCN gives alkyl cyanide ($R-\text{CN}$) because it is ionic; AgCN gives alkyl isocyanide ($R-\text{NC}$) because it is covalent.

21
Section B()
2 Marks
The presence of a carbonyl group in D-glucose is confirmed by its reaction with hydroxylamine. What product is formed? Also write the chemical equation when glucose is oxidized by mild oxidizing agent bromine water (Br2/H2O\text{Br}_2 / \text{H}_2\text{O}).
CBSE Official Step-Marking AllocationTotal: 2 M
Name glucose oxime and write equation with hydroxylamine
+1 M
Name gluconic acid and write oxidation equation with Br2/H2O\text{Br}_2/\text{H}_2\text{O}
+1 M
NCERT / CBSE Model Answer
Solution:
1. Reaction with Hydroxylamine (NH2OH\text{NH}_2\text{OH}):
D-glucose reacts with hydroxylamine to form glucose oxime (glucomonoxime), confirming the presence of a carbonyl group (>C=O>\text{C}=\text{O}):
CHO−(CHOH)4−CH2OH+NH2OH→CH=N−OH−(CHOH)4−CH2OH+H2O\text{CHO}-(\text{CHOH})_4-\text{CH}_2\text{OH} + \text{NH}_2\text{OH} \to \text{CH}=\text{N}-\text{OH}-(\text{CHOH})_4-\text{CH}_2\text{OH} + \text{H}_2\text{O}
2. Oxidation with Bromine Water (Br2/H2O\text{Br}_2 / \text{H}_2\text{O}):
Bromine water is a mild oxidizing agent that selectively oxidizes the aldehyde group (−CHO-\text{CHO}) to a carboxylic acid group (−COOH-\text{COOH}) without affecting the alcohol groups, forming gluconic acid:
CHO−(CHOH)4−CH2OH+[O]→Br2/H2OCOOH−(CHOH)4−CH2OH\text{CHO}-(\text{CHOH})_4-\text{CH}_2\text{OH} + [\text{O}] \xrightarrow{\text{Br}_2 / \text{H}_2\text{O}} \text{COOH}-(\text{CHOH})_4-\text{CH}_2\text{OH}

Product: Gluconic acid.
Chief Examiner Evaluation Report & Pitfalls:

Mild $\text{Br}_2/\text{H}_2\text{O}$ oxidizes only the $-\text{CHO}$ group (giving gluconic acid), whereas strong $\text{HNO}_3$ oxidizes both $-\text{CHO}$ and primary $-\text{CH}_2\text{OH}$ (giving saccharic acid).

22
Section C()
3 Marks
(a) Write down the electrode reactions occurring at the cathode and anode when an aqueous solution of CuCl2\text{CuCl}_2 is electrolyzed using inert platinum electrodes.
(b) State Kohlrausch's law of independent migration of ions.
(c) Express the limiting molar conductivity of Al2(SO4)3\text{Al}_2(\text{SO}_4)_3 in terms of the limiting molar conductivities of its constituent ions.
CBSE Official Step-Marking AllocationTotal: 3 M
(a) Write cathode reaction Cu2++2e−→Cu\text{Cu}^{2+}+2e^- \to \text{Cu} and anode 2Cl−→Cl2+2e−2\text{Cl}^- \to \text{Cl}_2+2e^-
+1 M
(b) State Kohlrausch's law of independent migration of ions
+1 M
(c) Write Λm∘=2λ∘(Al3+)+3λ∘(SO42−)\Lambda_m^\circ = 2\lambda^\circ(\text{Al}^{3+}) + 3\lambda^\circ(\text{SO}_4^{2-})
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Electrolysis of aqueous CuCl2\text{CuCl}_2 with Pt electrodes:
- At Cathode (−-, reduction): Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \to \text{Cu}(s) (E∘=+0.34 VE^\circ = +0.34\text{ V} is preferred over reduction of water E∘=−0.83 VE^\circ = -0.83\text{ V}).
- At Anode (++, oxidation): 2Cl−(aq)→Cl2(g)+2e−2\text{Cl}^-(aq) \to \text{Cl}_2(g) + 2e^- (preferred over oxidation of water due to overpotential of oxygen).
(b) Kohlrausch's Law:
At infinite dilution, when dissociation of electrolyte is complete, each ion makes a definite independent contribution to the total molar conductivity of the electrolyte, irrespective of the nature of the co-ion with which it is associated:
Λm∘=ν+λ+∘+ν−λ−∘\Lambda_m^\circ = \nu_+ \lambda_+^\circ + \nu_- \lambda_-^\circ
(c) Limiting molar conductivity of Al2(SO4)3\text{Al}_2(\text{SO}_4)_3:
Λm∘[Al2(SO4)3]=2λm∘(Al3+)+3λm∘(SO42−).\Lambda_m^\circ[\text{Al}_2(\text{SO}_4)_3] = 2\lambda_m^\circ(\text{Al}^{3+}) + 3\lambda_m^\circ(\text{SO}_4^{2-}).
Chief Examiner Evaluation Report & Pitfalls:

Do not forget the stoichiometric coefficients (2 for $\text{Al}^{3+}$ and 3 for $\text{SO}_4^{2-}$).

23
Section C()
3 Marks
Account for the following observations:
(a) The lowest oxide of a transition metal is basic, whereas the highest oxide is acidic.
(b) Chromium is a hard solid with a high melting point, whereas mercury is a liquid at room temperature.
(c) Zr\text{Zr} (atomic number 40) and Hf\text{Hf} (atomic number 72) have almost identical atomic and ionic radii.
CBSE Official Step-Marking AllocationTotal: 3 M
(a) Explain basic nature of lower oxides (ionic) and acidic nature of higher oxides (covalent)
+1 M
(b) Explain Cr hardness via 6 unpaired electrons vs Hg liquid via filled d10s2d^{10}s^2 orbitals
+1 M
(c) Explain identical radii of Zr and Hf due to Lanthanoid contraction
+1 M
NCERT / CBSE Model Answer
Solution:
(a) In lower oxidation states, the metal has low positive charge density and contains unshared valence electrons that are not involved in bonding, enabling it to donate electrons (Lewis base / ionic character). In higher oxidation states, the metal has high positive charge density and electronegativity, so its dd-orbitals are empty and it strongly polarizes oxygen atoms (covalent character), allowing it to accept electron pairs (Lewis acid).
(b) Chromium ([Ar]3d54s1[\text{Ar}]3d^5 4s^1) has 6 valence electrons (maximum unpaired electrons) available for strong interatomic metallic and covalent bonding, resulting in a rigid lattice and high melting point. Mercury ([Xe]4f145d106s2[\text{Xe}]4f^{14} 5d^{10} 6s^2) has completely filled dd-orbitals with no unpaired electrons, resulting in very weak metallic bonding and causing it to be liquid at room temperature.
(c) Due to Lanthanoid Contraction: The filling of 4f4f subshell before the 5d5d series in Hafnium results in poor shielding of the nuclear charge by 4f4f electrons. Consequently, the effective nuclear charge increases, pulling outer electron shells inward and compensating for the expected size increase due to an additional shell, making radii of Zr\text{Zr} and Hf\text{Hf} nearly identical (160 pm160\text{ pm} and 159 pm159\text{ pm}).
Chief Examiner Evaluation Report & Pitfalls:

Always mention the imperfect shielding of $4f$ electrons when explaining Lanthanoid contraction.

24
Section C()
3 Marks
(a) Give the chemical reaction involved when pp-nitrotoluene undergoes Étard reaction to form pp-nitrobenzaldehyde.
(b) How will you convert benzaldehyde to acetophenone in two steps?
(c) Write the chemical test to distinguish between benzaldehyde and acetaldehyde.
CBSE Official Step-Marking AllocationTotal: 3 M
(a) Write Étard reaction with CrO2Cl2\text{CrO}_2\text{Cl}_2 and hydrolysis
+1 M
(b) Write 2-step synthesis: Grignard addition followed by oxidation
+1 M
(c) State Iodoform test: acetaldehyde gives yellow CHI3\text{CHI}_3, benzaldehyde does not
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Étard Reaction:
pp-nitrotoluene is oxidized by chromyl chloride (CrO2Cl2\text{CrO}_2\text{Cl}_2) in CS2\text{CS}_2 to form a brown chromium complex, which on subsequent acidic hydrolysis yields pp-nitrobenzaldehyde:
O2N−C6H4−CH3+2CrO2Cl2→CS2O2N−C6H4−CH(OCrOHCl2)2→H3O+O2N−C6H4−CHO\text{O}_2\text{N}-\text{C}_6\text{H}_4-\text{CH}_3 + 2\text{CrO}_2\text{Cl}_2 \xrightarrow{\text{CS}_2} \text{O}_2\text{N}-\text{C}_6\text{H}_4-\text{CH}(\text{OCrOHCl}_2)_2 \xrightarrow{\text{H}_3\text{O}^+} \text{O}_2\text{N}-\text{C}_6\text{H}_4-\text{CHO}
(b) Conversion of Benzaldehyde to Acetophenone:
- Step 1: Reaction with methyl magnesium bromide (Grignard reagent) followed by hydrolysis:
C6H5CHO+CH3MgBr→ether→H3O+C6H5−CH(OH)−CH3(1-phenylethanol)\text{C}_6\text{H}_5\text{CHO} + \text{CH}_3\text{MgBr} \xrightarrow{\text{ether}} \xrightarrow{\text{H}_3\text{O}^+} \text{C}_6\text{H}_5-\text{CH}(\text{OH})-\text{CH}_3 \quad (1\text{-phenylethanol})

- Step 2: Oxidation of secondary alcohol with PCC or acidic K2Cr2O7\text{K}_2\text{Cr}_2\text{O}_7:
C6H5−CH(OH)−CH3→PCC / CrO3C6H5−CO−CH3(Acetophenone)\text{C}_6\text{H}_5-\text{CH}(\text{OH})-\text{CH}_3 \xrightarrow{\text{PCC / } \text{CrO}_3} \text{C}_6\text{H}_5-\text{CO}-\text{CH}_3 \quad (\text{Acetophenone})
(c) Distinction Test (Iodoform Test):
Acetaldehyde (CH3CHO\text{CH}_3\text{CHO}) contains a CH3CO−\text{CH}_3\text{CO}- group and gives a yellow precipitate of iodoform (CHI3\text{CHI}_3) when heated with I2\text{I}_2 and NaOH\text{NaOH}:
CH3CHO+3I2+4NaOH→CHI3↓(yellow)+HCOONa+3NaI+3H2O\text{CH}_3\text{CHO} + 3\text{I}_2 + 4\text{NaOH} \to \text{CHI}_3 \downarrow (\text{yellow}) + \text{HCOONa} + 3\text{NaI} + 3\text{H}_2\text{O}

Benzaldehyde does not contain a methyl ketone/methyl carbonyl group and does not give the iodoform test.
Chief Examiner Evaluation Report & Pitfalls:

Fehling's test also distinguishes them: acetaldehyde reduces Fehling's solution to red $\text{Cu}_2\text{O}$; benzaldehyde does not.

25
Section C()
3 Marks
(a) Give the structures of all possible dipeptides formed when glycine (Gly: H2N−CH2−COOH\text{H}_2\text{N}-\text{CH}_2-\text{COOH}) and alanine (Ala: H2N−CH(CH3)−COOH\text{H}_2\text{N}-\text{CH}(\text{CH}_3)-\text{COOH}) combine.
(b) What are essential amino acids? Give one example.
(c) Differentiate between globular and fibrous proteins with one example of each.
CBSE Official Step-Marking AllocationTotal: 3 M
(a) Write structures of Gly-Ala and Ala-Gly with peptide linkage −CONH−-\text{CONH}-
+1 M
(b) Define essential amino acids with example (Valine/Lysine)
+1 M
(c) Differentiate fibrous and globular proteins with examples
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Possible Dipeptides:
Four dipeptides can be formed:
1. Gly-Ala: H2N−CH2−CONH−CH(CH3)−COOH\text{H}_2\text{N}-\text{CH}_2-\text{CONH}-\text{CH}(\text{CH}_3)-\text{COOH}
2. Ala-Gly: H2N−CH(CH3)−CONH−CH2−COOH\text{H}_2\text{N}-\text{CH}(\text{CH}_3)-\text{CONH}-\text{CH}_2-\text{COOH}
3. Gly-Gly: H2N−CH2−CONH−CH2−COOH\text{H}_2\text{N}-\text{CH}_2-\text{CONH}-\text{CH}_2-\text{COOH}
4. Ala-Ala: H2N−CH(CH3)−CONH−CH(CH3)−COOH\text{H}_2\text{N}-\text{CH}(\text{CH}_3)-\text{CONH}-\text{CH}(\text{CH}_3)-\text{COOH}
(b) Essential Amino Acids:
Amino acids that cannot be synthesized by the human body and must be supplied through the diet are called essential amino acids.
Example: Valine, Leucine, Isoleucine, Lysine.
(c) Globular vs Fibrous Proteins:
- Fibrous Proteins: Polypeptide chains run parallel and are held together by hydrogen and disulphide bonds, forming fiber-like structures. Insoluble in water. Example: Keratin (in hair/wool), Myosin (in muscles).
- Globular Proteins: Polypeptide chains coil around to give a spherical shape. Soluble in water. Example: Insulin, Albumin, Hemoglobin.
Chief Examiner Evaluation Report & Pitfalls:

Highlight the peptide bond $-\text{C}(=\text{O})-\text{NH}-$ clearly when writing peptide structures.

26
Section C()
3 Marks
(a) Write the mechanism of acid-catalyzed dehydration of ethanol to yield ethene at 443 K443\text{ K}.
(b) Why does dehydration of ethanol at 413 K413\text{ K} yield diethyl ether instead of ethene?
CBSE Official Step-Marking AllocationTotal: 3 M
Step 1: Protonation to form ethyloxonium ion
+0.5 M
Step 2: Slow cleavage to carbocation (RDS)
+1 M
Step 3: Rapid proton loss to form ethene
+0.5 M
(b) Explain SN2S_N2 bimolecular substitution favored at 413 K413\text{ K} with excess alcohol
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Mechanism of Dehydration of Ethanol to Ethene (443 K443\text{ K}):
- Step 1: Protonation of alcohol:
Ethanol acts as a Lewis base and accepts a proton from the acid to form protonated alcohol (ethyloxonium ion):
CH3−CH2−O¨H+H+⇌CH3−CH2−O+H2\text{CH}_3-\text{CH}_2-\ddot{\text{O}}\text{H} + \text{H}^+ \rightleftharpoons \text{CH}_3-\text{CH}_2-\text{O}^+\text{H}_2

- Step 2: Formation of carbocation (Slow, Rate-determining step):
Water is eliminated to generate an ethyl carbocation:
CH3−CH2−O+H2→slowCH3−CH2++H2O\text{CH}_3-\text{CH}_2-\text{O}^+\text{H}_2 \xrightarrow{\text{slow}} \text{CH}_3-\text{CH}_2^+ + \text{H}_2\text{O}

- Step 3: Elimination of proton (Fast):
A proton is eliminated from the β\beta-carbon by the base to regenerate the acid catalyst and form ethene:
H−CH2−CH2+→fastCH2=CH2+H+\text{H}-\text{CH}_2-\text{CH}_2^+ \xrightarrow{\text{fast}} \text{CH}_2=\text{CH}_2 + \text{H}^+
(b) Explanation for Ether Formation at 413 K413\text{ K}:
At the lower temperature of 413 K413\text{ K} in the presence of excess ethanol, the protonated ethanol undergoes nucleophilic bimolecular substitution (SN2S_N2) with another unprotonated ethanol molecule rather than unimolecular elimination (E1E1):
C2H5OH+C2H5OH2+→413 KC2H5−O+(H)−C2H5→−H+C2H5−O−C2H5\text{C}_2\text{H}_5\text{OH} + \text{C}_2\text{H}_5\text{OH}_2^+ \xrightarrow{413\text{ K}} \text{C}_2\text{H}_5-\text{O}^+(\text{H})-\text{C}_2\text{H}_5 \xrightarrow{-\text{H}^+} \text{C}_2\text{H}_5-\text{O}-\text{C}_2\text{H}_5

Elimination has higher activation energy and requires higher temperature (443 K443\text{ K}).
Chief Examiner Evaluation Report & Pitfalls:

Always indicate curved electron-pushing arrows and state that carbocation formation is the slow rate-determining step.

27
Section C()
3 Marks
An organic compound AA having molecular formula C4H9Cl\text{C}_4\text{H}_9\text{Cl} on hydrolysis with aqueous KOH\text{KOH} gives compound BB. Compound BB reacts with Lucas reagent (conc. HCl+anhydrous ZnCl2\text{HCl} + \text{anhydrous } \text{ZnCl}_2) instantly to produce turbidity. When compound AA is treated with alcoholic KOH\text{KOH}, it gives compound CC which on ozonolysis gives acetone as one of the products.
Identify compounds A,B,A, B, and CC. Write all the reactions involved.
CBSE Official Step-Marking AllocationTotal: 3 M
Deduce BB is tertiary alcohol from instant Lucas turbidity
+1 M
Identify A=(CH3)3C−ClA = (\text{CH}_3)_3\text{C}-\text{Cl} and write hydrolysis equation to BB
+1 M
Identify C=(CH3)2C=CH2C = (\text{CH}_3)_2\text{C}=\text{CH}_2 and write elimination and ozonolysis reactions
+1 M
NCERT / CBSE Model Answer
Solution:
1. Deduction:
- Compound BB gives immediate turbidity with Lucas reagent   ⟹  B\implies B is a tertiary (3∘3^\circ) alcohol.
- Since the molecular formula of AA is C4H9Cl\text{C}_4\text{H}_9\text{Cl}, the only tertiary alcohol with 4 carbons is 2-methylpropan-2-ol (tert-butyl alcohol):
B=CH3−C(CH3)(OH)−CH3B = \text{CH}_3-\text{C}(\text{CH}_3)(\text{OH})-\text{CH}_3

- Therefore, precursor AA is 2-chloro-2-methylpropane (tert-butyl chloride):
A=(CH3)3C−ClA = (\text{CH}_3)_3\text{C}-\text{Cl}

- Dehydrohalogenation of AA with alcoholic KOH\text{KOH} gives an alkene CC:
(CH3)3C−Cl→alc. KOH(CH3)2C=CH2+KCl+H2O(\text{CH}_3)_3\text{C}-\text{Cl} \xrightarrow{\text{alc. KOH}} (\text{CH}_3)_2\text{C}=\text{CH}_2 + \text{KCl} + \text{H}_2\text{O}

C=2-methylpropeneC = \text{2-methylpropene}

- Ozonolysis of CC yields acetone and formaldehyde:
(CH3)2C=CH2→(i)O3,(ii)Zn/H2OCH3COCH3+HCHO(\text{CH}_3)_2\text{C}=\text{CH}_2 \xrightarrow{(i) \text{O}_3, (ii) \text{Zn}/\text{H}_2\text{O}} \text{CH}_3\text{COCH}_3 + \text{HCHO}

This confirms acetone is formed.
2. Identification:
- Compound AA: 2-Chloro-2-methylpropane [(CH3)3C−Cl(\text{CH}_3)_3\text{C}-\text{Cl}]
- Compound BB: 2-Methylpropan-2-ol [(CH3)3C−OH(\text{CH}_3)_3\text{C}-\text{OH}]
- Compound CC: 2-Methylpropene [(CH3)2C=CH2(\text{CH}_3)_2\text{C}=\text{CH}_2]
Chief Examiner Evaluation Report & Pitfalls:

Turbidity timing in Lucas test: $3^\circ$ alcohol = instantaneous, $2^\circ$ alcohol = 5 minutes, $1^\circ$ alcohol = no turbidity at room temperature.

28
Section C()
3 Marks
Calculate the equilibrium constant KcK_c and standard Gibbs energy change (ΔG∘\Delta G^\circ) for the following cell reaction at 298 K298\text{ K}:
3Sn4+(aq)+2Al(s)→3Sn2+(aq)+2Al3+(aq)3\text{Sn}^{4+}(aq) + 2\text{Al}(s) \to 3\text{Sn}^{2+}(aq) + 2\text{Al}^{3+}(aq)

Given: ESn4+/Sn2+∘=+0.15 VE^\circ_{\text{Sn}^{4+}/\text{Sn}^{2+}} = +0.15\text{ V}, EAl3+/Al∘=−1.66 VE^\circ_{\text{Al}^{3+}/\text{Al}} = -1.66\text{ V}, 1 F=96500 C mol−11\text{ F} = 96500\text{ C mol}^{-1}.
CBSE Official Step-Marking AllocationTotal: 3 M
Find n=6n = 6 and calculate Ecell∘=0.15−(−1.66)=+1.81 VE^\circ_{\text{cell}} = 0.15 - (-1.66) = +1.81\text{ V}
+1 M
Compute ΔG∘=−nFE∘=−1048 kJ/mol\Delta G^\circ = -nFE^\circ = -1048\text{ kJ/mol}
+1 M
Compute log⁡Kc=183.76  ⟹  Kc≈5.75×10183\log K_c = 183.76 \implies K_c \approx 5.75 \times 10^{183}
+1 M
NCERT / CBSE Model Answer
Solution:
1. Standard Cell Potential (Ecell∘E^\circ_{\text{cell}}):
- Cathode (reduction): Sn4++2e−→Sn2+\text{Sn}^{4+} + 2e^- \to \text{Sn}^{2+} (E∘=+0.15 VE^\circ = +0.15\text{ V})
- Anode (oxidation): Al→Al3++3e−\text{Al} \to \text{Al}^{3+} + 3e^- (E∘=−1.66 VE^\circ = -1.66\text{ V})
- Number of electrons transferred (nn): LCM of 2 and 3 is n=6n = 6.
Ecell∘=Ecathode∘−Eanode∘=0.15 V−(−1.66 V)=+1.81 V.E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.15\text{ V} - (-1.66\text{ V}) = +1.81\text{ V}.
2. Standard Gibbs Energy Change (ΔG∘\Delta G^\circ):
ΔG∘=−nFEcell∘=−6×96500 C/mol×1.81 V\Delta G^\circ = -n F E^\circ_{\text{cell}} = -6 \times 96500\text{ C/mol} \times 1.81\text{ V}

ΔG∘=−1047990 J/mol=−1048 kJ/mol.\Delta G^\circ = -1047990\text{ J/mol} = -1048\text{ kJ/mol}.
3. Equilibrium Constant (KcK_c):
Ecell∘=0.0591nlog⁡10KcE^\circ_{\text{cell}} = \frac{0.0591}{n} \log_{10} K_c

1.81=0.05916log⁡Kc1.81 = \frac{0.0591}{6} \log K_c

log⁡Kc=1.81×60.0591=10.860.0591≈183.76\log K_c = \frac{1.81 \times 6}{0.0591} = \frac{10.86}{0.0591} \approx 183.76

Kc=10183.76=5.75×10183.K_c = 10^{183.76} = 5.75 \times 10^{183}.
Chief Examiner Evaluation Report & Pitfalls:

Do not forget to balance electron count: $3\text{Sn}^{4+} + 6e^- \to 3\text{Sn}^{2+}$ and $2\text{Al} \to 2\text{Al}^{3+} + 6e^-$, so $n = 6$.

29
Section D()
Internal Choice (OR)4 Marks
Case Study Based Question: Chemical Kinetics & Reaction Rate Law
The rate of a chemical reaction is governed by the concentrations of the reactants and the reaction mechanism. For the gas-phase reaction between hydrogen and bromine:
H2(g)+Br2(g)→2HBr(g)\text{H}_2(g) + \text{Br}_2(g) \to 2\text{HBr}(g)

Experimental measurements establish the differential rate law as:
Rate=k[H2][Br2]1/2\text{Rate} = k [\text{H}_2] [\text{Br}_2]^{1/2}
Based on the above information, answer the following questions:
(a) What is the overall order of the reaction and what are the SI units of rate constant kk? [1 Mark]
(b) If the concentration of Br2\text{Br}_2 is tripled while keeping the concentration of H2\text{H}_2 constant, how will the rate of reaction change? [1 Mark]
(c) For an elementary reaction A+B→ProductsA + B \to \text{Products}, compare the molecularity and order. [1 Mark]
(d) Two proposed mechanisms are:
Mechanism 1: A→Intermediate\text{A} \to \text{Intermediate} (slow); Intermediate+B→Product\text{Intermediate} + \text{B} \to \text{Product} (fast)
Mechanism 2: A+B→Intermediate\text{A} + \text{B} \to \text{Intermediate} (slow); Intermediate→Product\text{Intermediate} \to \text{Product} (fast)
If the experimentally observed rate law is Rate=k[A][B]\text{Rate} = k[A][B], which mechanism is consistent with experimental findings and why? [1 Mark]
OR
(b) In the reaction Rate=k[H2][Br2]1/2\text{Rate} = k [\text{H}_2] [\text{Br}_2]^{1/2}, if the concentration of Br2\text{Br}_2 is made 9 times its original value, by what factor must [H2][\text{H}_2] be altered so that the overall reaction rate remains constant? [1 Mark]
CBSE Official Step-Marking AllocationTotal: 4 M
(a) Find order = 3/23/2 and units of k=mol−1/2L1/2s−1k = \text{mol}^{-1/2}\text{L}^{1/2}\text{s}^{-1}
+1 M
(b) Calculate rate increases by factor of 3\sqrt{3}
+1 M
(c) State molecularity = order = 2 for elementary reaction
+1 M
(d) Justify Mechanism 2 based on rate-determining step Rate=k[A][B]\text{Rate} = k[A][B]
+1 M
NCERT / CBSE Model Answer
Solution:
(a) Overall order n=1+12=32=1.5n = 1 + \frac{1}{2} = \frac{3}{2} = 1.5.
Units of rate constant kk:
Units of k=(mol L−1)1−n s−1=(mol L−1)1−3/2 s−1=mol−1/2L1/2s−1.\text{Units of } k = (\text{mol L}^{-1})^{1-n} \text{ s}^{-1} = (\text{mol L}^{-1})^{1 - 3/2} \text{ s}^{-1} = \text{mol}^{-1/2} \text{L}^{1/2} \text{s}^{-1}.
(b) New rate R′=k[H2](3[Br2])1/2=3k[H2][Br2]1/2=3RR' = k [\text{H}_2] (3[\text{Br}_2])^{1/2} = \sqrt{3} k [\text{H}_2] [\text{Br}_2]^{1/2} = \sqrt{3} R.
The rate of reaction increases by a factor of 3≈1.732\sqrt{3} \approx 1.732.
(c) For an elementary reaction, molecularity and order are identical. Both represent the number of colliding species in the single-step process (here molecularity = order = 2, bimolecular).
(d) The slowest step is the rate-determining step (RDS).
- For Mechanism 1: Rate=k[A]\text{Rate} = k[A] (first order in A, independent of B).
- For Mechanism 2: Rate=k[A][B]\text{Rate} = k[A][B] (first order in both A and B).
Since the experimental rate law is Rate=k[A][B]\text{Rate} = k[A][B], Mechanism 2 is consistent with the experimental findings.

Alternative Option Solution:

R=k[H2][Br2]1/2R = k [\text{H}_2] [\text{Br}_2]^{1/2}

When [Br2]′=9[Br2][\text{Br}_2]' = 9[\text{Br}_2]:
[Br2′]1/2=(9[Br2])1/2=3[Br2]1/2[\text{Br}_2']^{1/2} = (9[\text{Br}_2])^{1/2} = 3[\text{Br}_2]^{1/2}

For the rate to remain constant (R′=RR' = R):
k[H2]′(3[Br2]1/2)=k[H2][Br2]1/2  ⟹  [H2]′=13[H2].k [\text{H}_2]' (3[\text{Br}_2]^{1/2}) = k [\text{H}_2] [\text{Br}_2]^{1/2} \implies [\text{H}_2]' = \frac{1}{3} [\text{H}_2].

Thus, the concentration of H2\text{H}_2 must be reduced to one-third of its original value.
Chief Examiner Evaluation Report & Pitfalls:

Rate-determining step determines the theoretical rate law; fast steps after the RDS do not enter the rate equation directly.

30
Section D()
Internal Choice (OR)4 Marks
Case Study Based Question: Basicity of Amines & Substituent Effects
Amines are organic bases that accept protons due to the presence of an unshared pair of electrons on the nitrogen atom. The basic strength of an amine in aqueous solution is quantified by its base dissociation constant KbK_b or pKbpK_b value (pKb=−log⁡KbpK_b = -\log K_b). A lower pKbpK_b value indicates a stronger base. The basicity is influenced by three factors: inductive effect (+I+I), steric hindrance of alkyl groups, and solvation energy of the substituted ammonium cation.
Based on the above information, answer the following questions:
(a) Arrange the following in decreasing order of basic strength in aqueous solution: (CH3)2NH,CH3NH2,(CH3)3N,NH3(\text{CH}_3)_2\text{NH}, \text{CH}_3\text{NH}_2, (\text{CH}_3)_3\text{N}, \text{NH}_3. [1 Mark]
(b) Why is aniline a weaker base than cyclohexylamine? [1 Mark]
(c) What is the effect of an electron-withdrawing group (−NO2-\text{NO}_2) on the basic strength of aromatic amines? [1 Mark]
(d) Write the reaction showing the acylation of ethanamine with ethanoyl chloride. [1 Mark]
OR
(c) Arrange the following in increasing order of their pKbpK_b values: C6H5NH2,C2H5NH2,(C2H5)2NH,NH3\text{C}_6\text{H}_5\text{NH}_2, \text{C}_2\text{H}_5\text{NH}_2, (\text{C}_2\text{H}_5)_2\text{NH}, \text{NH}_3. [1 Mark]
CBSE Official Step-Marking AllocationTotal: 4 M
(a) State methyl series basicity order: 2∘>1∘>3∘>NH32^\circ > 1^\circ > 3^\circ > \text{NH}_3
+1 M
(b) Explain resonance delocalization of lone pair into benzene ring in aniline
+1 M
(c) State electron-withdrawing groups decrease basicity via −I/−R-I/-R effects
+1 M
(d) Write acylation equation forming N-ethylethanamide in presence of pyridine
+1 M
NCERT / CBSE Model Answer
Solution:
(a) In aqueous solution, considering inductive (+I+I), steric hindrance, and solvation effects together, the basic strength order for methyl-substituted amines is:
(CH3)2NH>CH3NH2>(CH3)3N>NH3(\text{CH}_3)_2\text{NH} > \text{CH}_3\text{NH}_2 > (\text{CH}_3)_3\text{N} > \text{NH}_3

Order: 2∘>1∘>3∘>NH32^\circ > 1^\circ > 3^\circ > \text{NH}_3.
(b) In aniline, the unshared electron pair on nitrogen is delocalized over the benzene ring through resonance (+R+R effect), making it less available for protonation. Furthermore, the anilinium ion formed has only two resonance structures, while aniline has five, so protonation is destabilizing. In cyclohexylamine, the lone pair on nitrogen is localized (no resonance) and the cyclohexyl ring exerts a +I+I effect, making it a much stronger base.
(c) An electron-withdrawing group (−NO2-\text{NO}_2) exerts strong −I-I and −R-R effects, pulling electron density away from the nitrogen atom and destabilizing the conjugate anilinium ion. This significantly decreases the basic strength (and increases pKbpK_b).
(d) Acylation of Ethanamine:
C2H5NH2+CH3COCl→PyridineCH3CONHC2H5+HCl\text{C}_2\text{H}_5\text{NH}_2 + \text{CH}_3\text{COCl} \xrightarrow{\text{Pyridine}} \text{CH}_3\text{CONH}\text{C}_2\text{H}_5 + \text{HCl}

Product: N-Ethylethanamide (or N-ethylacetamide). Pyridine is added to neutralize HCl\text{HCl} and shift equilibrium forward.

Alternative Option Solution:

Higher basicity corresponds to smaller pKbpK_b. Therefore, increasing order of pKbpK_b values corresponds to decreasing order of basicity:
Basicity order: (C2H5)2NH>C2H5NH2>NH3>C6H5NH2(\text{C}_2\text{H}_5)_2\text{NH} > \text{C}_2\text{H}_5\text{NH}_2 > \text{NH}_3 > \text{C}_6\text{H}_5\text{NH}_2.
Increasing order of pKbpK_b:
(C2H5)2NH<C2H5NH2<NH3<C6H5NH2.(\text{C}_2\text{H}_5)_2\text{NH} < \text{C}_2\text{H}_5\text{NH}_2 < \text{NH}_3 < \text{C}_6\text{H}_5\text{NH}_2.
Chief Examiner Evaluation Report & Pitfalls:

For methyl amines: $2^\circ > 1^\circ > 3^\circ$ (order 213). For ethyl amines: $2^\circ > 3^\circ > 1^\circ$ (order 231).

31
Section E()
Internal Choice (OR)5 Marks
(I) (a) A purple colored crystalline compound AA, which is a strong oxidizing agent, is prepared by fusing pyrolusite ore (MnO2\text{MnO}_2) with KOH\text{KOH} in the presence of air, followed by electrolytic oxidation of the green mass BB.
(i) Identify compounds AA and BB.
(ii) Write balanced ionic equations for the reaction of acidified compound AA with: (1) Iodide ions (I−\text{I}^-), and (2) Oxalate ions (C2O42−\text{C}_2\text{O}_4^{2-}).
(b) Using valence bond theory, predict the hybridization, geometry, and magnetic behavior of [Co(NH3)6]3+[\text{Co}(\text{NH}_3)_6]^{3+}. (Atomic number of Co=27\text{Co} = 27).
OR
(II) (a) Explain why Cu+\text{Cu}^+ ion is not stable in aqueous solutions.
(b) Calculate the spin-only magnetic moment of Cr3+\text{Cr}^{3+} ion.
(c) Write IUPAC name and draw geometrical isomers of [Pt(NH3)2Cl2][\text{Pt}(\text{NH}_3)_2\text{Cl}_2].
CBSE Official Step-Marking AllocationTotal: 5 M
(a) Identify A=KMnO4,B=K2MnO4A = \text{KMnO}_4, B = \text{K}_2\text{MnO}_4
+1 M
Write balanced equations for I−\text{I}^- to I2\text{I}_2 and C2O42−\text{C}_2\text{O}_4^{2-} to CO2\text{CO}_2
+2 M
(b) Deduce d2sp3d^2sp^3 hybridization, octahedral geometry, diamagnetic for [Co(NH3)6]3+[\text{Co}(\text{NH}_3)_6]^{3+}
+2 M
NCERT / CBSE Model Answer
Solution:
(I) (a) (i) Identification:
- Green mass BB: Potassium manganate (K2MnO4\text{K}_2\text{MnO}_4)
MnO2+2KOH+12O2→K2MnO4+H2O\text{MnO}_2 + 2\text{KOH} + \frac{1}{2}\text{O}_2 \to \text{K}_2\text{MnO}_4 + \text{H}_2\text{O}

- Purple compound AA: Potassium permanganate (KMnO4\text{KMnO}_4)
MnO42−→electrolytic oxidationMnO4−+e−\text{MnO}_4^{2-} \xrightarrow{\text{electrolytic oxidation}} \text{MnO}_4^- + e^-
(ii) Balanced Ionic Equations:
1. With Iodide (I−\text{I}^-) in acidic medium:
2MnO4−+10I−+16H+→2Mn2++5I2+8H2O2\text{MnO}_4^- + 10\text{I}^- + 16\text{H}^+ \to 2\text{Mn}^{2+} + 5\text{I}_2 + 8\text{H}_2\text{O}

2. With Oxalate (C2O42−\text{C}_2\text{O}_4^{2-}) in acidic medium:
2MnO4−+5C2O42−+16H+→2Mn2++10CO2+8H2O2\text{MnO}_4^- + 5\text{C}_2\text{O}_4^{2-} + 16\text{H}^+ \to 2\text{Mn}^{2+} + 10\text{CO}_2 + 8\text{H}_2\text{O}
(b) Valence Bond Theory Analysis of [Co(NH3)6]3+[\text{Co}(\text{NH}_3)_6]^{3+}:
- Electronic configuration of Co\text{Co}: [Ar]3d74s2[\text{Ar}]3d^7 4s^2.
- Oxidation state of Co\text{Co} is +3+3: Co3+=[Ar]3d6\text{Co}^{3+} = [\text{Ar}]3d^6.
- NH3\text{NH}_3 is a strong field ligand, forcing pairing of electrons in 3d3d orbitals:
6 electrons pair up into three 3d3d orbitals (t2g6t_{2g}^6), leaving two empty 3d3d orbitals.
- Available empty orbitals: two 3d3d, one 4s4s, three 4p4p.
- Hybridization: d2sp3d^2sp^3 (inner orbital / low-spin complex).
- Geometry: Octahedral.
- Magnetic Behavior: Diamagnetic (all electrons are paired, n=0n = 0).

Alternative Option Solution:

(a) Cu+\text{Cu}^+ is unstable in aqueous solution and readily disproportionates:
2Cu+(aq)→Cu2+(aq)+Cu(s)2\text{Cu}^+(aq) \to \text{Cu}^{2+}(aq) + \text{Cu}(s)

This is because the hydration enthalpy of Cu2+\text{Cu}^{2+} is much more negative (higher) than that of Cu+\text{Cu}^+ due to its smaller ionic radius and higher charge density, which more than compensates for the second ionization enthalpy of copper.
(b) For Cr3+\text{Cr}^{3+}: [Ar]3d3[\text{Ar}]3d^3. Number of unpaired electrons n=3n = 3.
Spin-only magnetic moment:
μ=n(n+2)=3(3+2)=15≈3.87 BM.\mu = \sqrt{n(n+2)} = \sqrt{3(3+2)} = \sqrt{15} \approx 3.87\text{ BM}.
(c) [Pt(NH3)2Cl2][\text{Pt}(\text{NH}_3)_2\text{Cl}_2]: Diamminedichloridoplatinum(II).
- cis-isomer: Both NH3\text{NH}_3 ligands are adjacent (90∘90^\circ); used as antitumor drug Cisplatin.
- trans-isomer: NH3\text{NH}_3 ligands are opposite (180∘180^\circ).
Chief Examiner Evaluation Report & Pitfalls:

In $[\text{Co}(\text{NH}_3)_6]^{3+}$, ammonia acts as a strong field ligand with $+3$ cobalt, causing complete electron pairing.

32
Section E()
Internal Choice (OR)5 Marks
(I) (a) Write the chemical reactions involved in the following:
(i) Kolbe's reaction
(ii) Reimer-Tiemann reaction
(iii) Williamson ether synthesis
(b) Give reasons:
(i) Phenol is more acidic than ethanol.
(ii) oo-Nitrophenol is steam volatile, while pp-nitrophenol is not.
OR
(II) (a) How will you synthesize:
(i) Salicylic acid from phenol
(ii) 2-Methoxy-2-methylpropane from an alkene
(b) Write the mechanism of the reaction of hydrogen iodide (HI\text{HI}) with methoxymethane.
CBSE Official Step-Marking AllocationTotal: 5 M
Write equations for Kolbe, Reimer-Tiemann, and Williamson reactions
+3 M
Explain phenoxide resonance stabilization vs ethoxide +I+I destabilization
+1 M
Explain intra- vs inter-molecular hydrogen bonding in nitrophenols
+1 M
NCERT / CBSE Model Answer
Solution:
(I) (a) Named Organic Reactions:
1. Kolbe's Reaction:
Sodium phenoxide is heated with carbon dioxide at 400 K400\text{ K} and 4−7 atm4-7\text{ atm}, followed by acidification, yielding salicylic acid (2-hydroxybenzoic acid) as major product:
C6H5ONa+CO2→4−7 atm400 K2−HOC6H4COONa→H+2−HOC6H4COOH\text{C}_6\text{H}_5\text{ONa} + \text{CO}_2 \xrightarrow[4-7\text{ atm}]{400\text{ K}} 2-\text{HOC}_6\text{H}_4\text{COONa} \xrightarrow{\text{H}^+} 2-\text{HOC}_6\text{H}_4\text{COOH}
2. Reimer-Tiemann Reaction:
Phenol is treated with chloroform (CHCl3\text{CHCl}_3) in the presence of aqueous NaOH\text{NaOH} at 340 K340\text{ K}, followed by hydrolysis, introducing a −CHO-\text{CHO} group ortho to −OH-\text{OH} to form salicylaldehyde (dichlorocarbene :___KATEX_STORE_1___\text{C}_6\text{H}_5\text{OH} + \text{CHCl}_3 + 3\text{NaOH} \to 2-\text{HOC}_6\text{H}_4\text{CHO} + 3\text{NaCl} + 2\text{H}_2\text{O}___KATEX_STORE_2___\text{CH}_3\text{CH}_2\text{ONa} + \text{CH}_3\text{Br} \to \text{CH}_3\text{CH}_2-\text{O}-\text{CH}_3 + \text{NaBr}___KATEX_STORE_3___\text{C}_6\text{H}_5\text{OH} \xrightarrow{\text{NaOH}} \text{C}_6\text{H}_5\text{ONa} \xrightarrow{(i) \text{CO}_2, 400\text{ K}, 4-7\text{ atm}} \xrightarrow{(ii) \text{H}^+} 2-\text{HOC}_6\text{H}_4\text{COOH}___KATEX_STORE_4___(\text{CH}_3)_2\text{C}=\text{CH}_2 + \text{HBr} \to (\text{CH}_3)_3\text{C}-\text{Br}___KATEX_STORE_5___(\text{CH}_3)_3\text{C}-\text{O}^-\text{Na}^+ + \text{CH}_3\text{I} \to (\text{CH}_3)_3\text{C}-\text{O}-\text{CH}_3 + \text{NaI}.___KATEX_STORE_6___\text{CH}_3-\ddot{\text{O}}-\text{CH}_3 + \text{H}^+ \rightleftharpoons \text{CH}_3-\text{O}^+(\text{H})-\text{CH}_3___KATEX_STORE_7___\text{I}^- + \text{CH}_3-\text{O}^+(\text{H})-\text{CH}_3 \xrightarrow{\text{slow}} \text{CH}_3\text{I} + \text{CH}_3\text{OH}$
Chief Examiner Evaluation Report & Pitfalls:

In Williamson synthesis of alkyl tert-butyl ethers, the alkoxide MUST be tertiary and the halide MUST be primary ($1^\circ$) to prevent alkene elimination.

33
Section E()
Internal Choice (OR)5 Marks
(I) (a) A solution containing 30 g30\text{ g} of a non-volatile, non-electrolyte solute in 90 g90\text{ g} of water has a vapor pressure of 2.8 kPa2.8\text{ kPa} at 298 K298\text{ K}. Further, 18 g18\text{ g} of water is added to the solution, and the new vapor pressure becomes 2.9 kPa2.9\text{ kPa} at 298 K298\text{ K}. Calculate:
(i) the molar mass of the solute,
(ii) the vapor pressure of pure water at 298 K298\text{ K}.
(b) Define osmotic pressure. Why is osmotic pressure measurement preferred over other colligative properties for determining the molar mass of biomolecules like proteins and polymers?
OR
(II) (a) State Raoult's law for a solution containing non-volatile solute.
(b) Calculate the freezing point of an aqueous solution containing 5% (by mass)5\%\text{ (by mass)} of cane sugar (sucrose, M=342 g/molM = 342\text{ g/mol}) if the freezing point of pure water is 273.15 K273.15\text{ K}. Given: KfK_f for water =1.86 K kg mol−1= 1.86\text{ K kg mol}^{-1}.
(c) What is the van 't Hoff factor (ii) for completely dissociated potassium ferricyanide K3[Fe(CN)6]\text{K}_3[\text{Fe}(\text{CN})_6]?
CBSE Official Step-Marking AllocationTotal: 5 M
(i) Solve simultaneous vapor pressure equations to get solute molar mass M=23 g/molM = 23\text{ g/mol}
+2 M
(ii) Compute pure water vapor pressure p∘=3.53 kPap^\circ = 3.53\text{ kPa}
+1 M
(b) Define osmotic pressure and state advantages for biomolecules at room temp
+2 M
NCERT / CBSE Model Answer
Solution:
(I) (a)
Let p∘p^\circ be the vapor pressure of pure water and MM be the molar mass of the non-volatile solute.
Number of moles of water initially: n1=9018=5 moln_1 = \frac{90}{18} = 5\text{ mol}.
Number of moles of solute: n2=30Mn_2 = \frac{30}{M}.
1. From Raoult's law: p∘−pp∘=x2=n2n1+n2\frac{p^\circ - p}{p^\circ} = x_2 = \frac{n_2}{n_1 + n_2}
p∘p=1+n2n1  ⟹  p∘2.8=1+30/M5=1+6M…(1)\frac{p^\circ}{p} = 1 + \frac{n_2}{n_1} \implies \frac{p^\circ}{2.8} = 1 + \frac{30/M}{5} = 1 + \frac{6}{M} \quad \dots (1)

2. When 18 g18\text{ g} of water is added, total moles of water become n1′=90+1818=6 moln_1' = \frac{90 + 18}{18} = 6\text{ mol}:
p∘2.9=1+30/M6=1+5M…(2)\frac{p^\circ}{2.9} = 1 + \frac{30/M}{6} = 1 + \frac{5}{M} \quad \dots (2)

3. Dividing equation (1) by equation (2):
2.92.8=1+6/M1+5/M=M+6M+5\frac{2.9}{2.8} = \frac{1 + 6/M}{1 + 5/M} = \frac{M + 6}{M + 5}

2.9(M+5)=2.8(M+6)2.9(M + 5) = 2.8(M + 6)

2.9M+14.5=2.8M+16.82.9M + 14.5 = 2.8M + 16.8

0.1M=2.3  ⟹  M=23 g/mol.0.1M = 2.3 \implies M = 23\text{ g/mol}.

4. Finding pure water vapor pressure p∘p^\circ:
p∘2.8=1+623=2923\frac{p^\circ}{2.8} = 1 + \frac{6}{23} = \frac{29}{23}

p∘=2.8×2923≈3.53 kPa.p^\circ = 2.8 \times \frac{29}{23} \approx 3.53\text{ kPa}.
(b) Osmotic Pressure & Advantages:
- Definition: The excess hydrostatic pressure that must be applied to the solution side to prevent the osmosis of solvent molecules through a semipermeable membrane.
- Why preferred for biomolecules:
1. Pressure is measured at room temperature (around 298 K298\text{ K}), preventing thermal denaturation or decomposition of biomolecules.
2. It uses molarity instead of molality.
3. Its magnitude is significantly large even for highly dilute solutions (10−3 M10^{-3}\text{ M}), allowing precise measurement.

Alternative Option Solution:

(a) Raoult's Law:
For a solution containing a non-volatile solute, the relative lowering of vapor pressure is equal to the mole fraction of the solute: p∘−pp∘=xsolute\frac{p^\circ - p}{p^\circ} = x_{\text{solute}}.
(b) Freezing Point Calculation:
5%5\% by mass solution: 5 g5\text{ g} sucrose in 95 g=0.095 kg95\text{ g} = 0.095\text{ kg} water.
Molality mm:
m=mass/Mkg of solvent=5/3420.095=0.014620.095≈0.1539 mol/kg.m = \frac{\text{mass}/M}{\text{kg of solvent}} = \frac{5 / 342}{0.095} = \frac{0.01462}{0.095} \approx 0.1539\text{ mol/kg}.

Depression in freezing point:
ΔTf=Kf⋅m=1.86×0.1539≈0.286 K.\Delta T_f = K_f \cdot m = 1.86 \times 0.1539 \approx 0.286\text{ K}.

Freezing point of solution:
Tf=Tf∘−ΔTf=273.15 K−0.29 K=272.86 K (or −0.29∘C).T_f = T_f^\circ - \Delta T_f = 273.15\text{ K} - 0.29\text{ K} = 272.86\text{ K} \text{ (or } -0.29^\circ\text{C)}.
(c) van 't Hoff factor for K3[Fe(CN)6]\text{K}_3[\text{Fe}(\text{CN})_6]:
Dissociation: K3[Fe(CN)6]→3K++[Fe(CN)6]3−\text{K}_3[\text{Fe}(\text{CN})_6] \to 3\text{K}^+ + [\text{Fe}(\text{CN})_6]^{3-}.
Total number of ions produced per formula unit n=3+1=4n = 3 + 1 = 4.
For 100%100\% dissociation: i=4i = 4.
Chief Examiner Evaluation Report & Pitfalls:

Writing $\frac{p^\circ}{p} = 1 + \frac{n_2}{n_1}$ avoids awkward nested denominators and prevents algebraic mistakes.